LK Smart Home

The Wiser Wireless ceiling PIR sensor detects movement within its range, and sends a status to the Wiser Gateway when movement is detected. The sensor is able to detect brightness, and sends the ambient light level to the Gateway. You can program the value threshold for light level and/or motion detection yourself, and determine the action for exceeding these values yourself. The sensor can be used to regulate light and to send push notifications when movement is detected. When the battery level is low, the sensor automatically alerts via the Wiser by SE app. Powered by two AAA batteries. To be part of the Wiser system, a Wiser Gateway is required.

The Wiser Door/Window sensor provides status to your Wiser system regarding open or closed windows and doors. Configuration is made possible by connecting the sensor to the Wiser Gateway with your Wiser app. The Door/Window sensor can be used on access doors to provide you a push message when the door is opened. This provides families with children an opportunity to receive a message when the child has safely arrived at home from school. Or the sensor can be used to control a light also connected to the system so that the light turns on when the door is opened after the sun has set. At low power you will be notified on your Wiser app. The device is powered by a CR2450 battery.

The Wiser wireless Temperature & Humidity combines two sensors within one device. The sensor provides feedback directly to the Wiser Gateway regarding the surrounding temperature and humidity levels from where the sensor is installed. The sensor provides what is needed to maintain a nice indoor climate or trigger automations based on temperature or humidity level. It is powered by CR2450 battery.

Table stand for the Wiser Gateway that is easy to install and can be placed as desired. Are available in the dimensions 86 x 54,6 x 86 mm (H x W x D).

Wiser wireless IP camera is used to monitor areas in your home. The camera has motion detection and the camera can automatically follow a moving object. It can send notification when motion is detected. The camera has built-in 2-way audio communication for communication between people at the camera and the user of the Wiser app. The camera's sensors can be included in Wiser programming. The camera has a resolution of 1080P and night vision of up to 7 meters. It has a patrol function where the camera records a 340° view of your home on a Micro SD card (not included). It supports Micro SD cards up to 128 GB with FAT formatting. The camera can be placed on a table, shelf or similar. or installed on a wall or ceiling. For ceiling installation, the 180° screen flip function can be activated. The camera is powered by a 5 V dc. power supply with micro-USB. A Wiser Gateway is not required to use the camera, but only the Wiser app.

The Wiser wireless build in shutter control (Puck) can be used to control one shutter/blind motor equipped with and end position switch. The puck provides the options of mechanical and electronic locking, setting a timer or a time schedule (via the Wiser app) and setting the running time (via the Wiser app). It is possible to control the puck in your home through the Wiser app if you own the Wiser Gateway. The puck can likewise be controlled through other Wiser devices if the devices are paired through the Zigbee network. You can always control the puck directly on-site through mechanical double push-buttons. Notice: Relay contacts mechanically locked against each other prevent simultaneous triggering of the two relay outputs. The puck must not be used to control safety relevant applications.

The Wiser water leakage sensor detects liquids and notify you upon detection on the Wiser app. The sensor is equipped with a siren that emits sound of up to 70 dB while at the same time notifying, when the leakage sensor is in contact with liquids. The sensor can be placed anywhere with a risk of waterleakage, such as under the dishwasher, in the washing room or any other room with a risk of waterleaks. The water leakage sensor is equipped with two contact plates that are activated when water or other liquid moves between the contact plates. The Wiser water leakage sensor is powered by two AAA batteries.

The Wiser radiator thermostat is used to regulate the temperature in rooms with water-borne radiators via the Wiser gateway. It provides the opportunity to connect the temperature with scenarios, automations and timetables in Wiserappen. It also allows you to boost the temperature up or down manually.

The thermostat uses integrated temperature sensors to control the flow of water through a radiator, thereby regulating the temperature in a room. The target temperature and switching times are set in the Wiser Home app. The top of the thermostat head can be turned in both directions, so that you can lower or raise (boost) the temperature locally. For how long is set in the app. If several thermostats are placed in the same room, they are automatically linked together in a thermostat group and work together via the app.