D-LINE Kabelgoot, Kabelhoes & Kabelbinders

The D-Line light duty floor cable cover reduces the amount of trailing cables that you have in your office, preventing accidents and keeping your office organised. Black in colour, it suits every office without making it look untidy. The inner channel of this cover measures 14x8mm, suitable for a range of common cables.

D-Line Outdoor Cable Box has been extensively tested to safely contain extension blocks and excess cable outdoors. IP54 rating provides dust and weather resistance. D-Line protective box to fix and protect your cables against dirt and moisture. Perfect for work in the garden, the garage and for Christmas tree lighting and more. Closed box is protected according to IP54 classification. The protective box must not be buried or covered with water. Fits power outlets up to 270 mm in length. Internal dimensions = 290mm (L) x 125mm (W) x 110mm (H).

Use Cable Tidy Bases to keep cables handy and in-reach, saving any need to pick-up fallen cables!

Simply peel and stick to adhere Bases to clean & smooth surfaces. They can hold in place cables, or other essentials up to 8mm diameter.

D-Line Cable Tidy Units provide the most popular solution to contain extension sockets and cable spaghetti. The smart tech design blends with modern surroundings. 3x rear cable entry/exit slots enable cables to be routed to left-side, right-side or vertical.

Fully safety tested, and produced from electrically-safe robust ABS material with an effective click-lock lid, these Socket Enclosures sort unsightly cables and contribute to a positive Health & Safety culture.

The D-Line 20 x 10mm Micro+ cable managment solution gives a neat solution for single cables, while offering additional internal capacity that can be useful around corners. Ideal for flexible cables (up to 8mm outer diameter), also fibre-optic, satellite/aerial and broadband cable installations.

Unique stylish ‘D-Line’ appearance
Saves channelling walls
Patented hinge &, click-lock lid
Self-adhesive
Paintable
8 adaptors included to enable popular connections:
(4 x 20x10mm x 1m Trunking White)
- 1 x Clip-Over Internal Bend
- 1 x Clip-Over External Bend
- 1 x Clip-Over Flat Bend
- 3 x Smooth Fit Couplers
- 2 x Smooth Fit End Caps
Can be shortened arbitrarily
A smart alternative to traditional offers
No sharp edges, gentle on impact
Fully safety tested and certified to BS EN 50085-1:2005
Color: white

1x Flat Bend Clip Over - Change direction by 90º on flat surfaces
2x Internal Bend Clip Over - Join lengths around 90º inside corners
2x External Bend Clip Over - Join lengths around 90º outside corners
1x Equal Tee Clip Over - Use to join 3 lengths of same profile.
2x Coupler Smooth Fit - Join 2 lengths of same profile on flat surface.
2x End Cap Smooth Fit - Neatly finish open ends.

Cable Tidy Clips have a low-profile design, being only 15mm width x 8mm depth – giving a smart appearance which can be ideal for tight spaces (and door frames for example).

The self-adhesive cable clips are produced in UK, using a flexible PVC that makes it easy to add or remove cables.

Users can simply pull back the top cover to insert cables up to 7mm outer diameter, then release the cover to hold the cables.

3 pcs connectors to D-Line cable ducts in size 50 x 25 mm. Lets you hide your cables in an elegant way.

2x Flat Bend: Change direction by 90 degrees on flat surfaces
2x Internal Bend: Join lengths around 90 degree inside corners
2x External Bend: Join lengths around 90 degree outside corners
2x Equal Tee: Use to join 3 lengths of same profile
3x Coupler: Join 2 lengths of same profile on flat surface
2x End Cap: Neatly finish open ends

Angled joint connectors for D-Line semi-circular cable ducts, set of four parts.

Angled joint connectors for D-Line semi-circular cable ducts, set of four parts.

1x Flat Bend: Change direction by 90 degrees on flat surfaces
2x Internal Bend: Join lengths around 90 degree inside corners
2x External Bend: Join lengths around 90 degree outside corners
2x Cable In/Outlet: Takes cables in or out of a trunking. Use between lengths on straight runs.
1x Coupler: Join 2 lengths of same profile on flat surface
2x End Cap: Neatly finish open ends

Couplings for D-Line cable ducts in semi-circular design, with a fine Oak Finish

D-Line Cable Tidy Units provide the most popular solution to contain extension sockets and cable spaghetti. The smart tech design blends with modern surroundings. 3x rear cable entry/exit slots enable cables to be routed to left-side, right-side or vertical.

Fully safety tested, and produced from electrically-safe robust ABS material with an effective click-lock lid, these Socket Enclosures sort unsightly cables and contribute to a positive Health & Safety culture.

D-Line Cable Tidy Units provide the most popular solution to contain extension sockets and cable spaghetti. The smart tech design blends with modern surroundings. 3x rear cable entry/exit slots enable cables to be routed to left-side, right-side or vertical.

Fully safety tested, and produced from electrically-safe robust ABS material with an effective click-lock lid, these Socket Enclosures sort unsightly cables and contribute to a positive Health & Safety culture.

Square-circular joints and ends for 22x22 mm cable duct

2x Flat Bend: Change direction by 90 degrees on flat surfaces
2x Internal Bend: Join lengths around 90 degree inside corners
2x External Bend: Join lengths around 90 degree outside corners
2x Equal Tee: Use to join 3 lengths of same profile
3x Coupler: Join 2 lengths of same profile on flat surface
2x End Cap: Neatly finish open ends

Kabelbeheerbuis, 1.1 m, zwart

Fits 30 x 15 mm cable duct

The D-Line 50 x 25mm Maxi is a versatile cable managment solution, providing capacity for several cables. The size and the capacity makes this profile a market-leading solution that is ideal for many AV, antenna and wall mounted TV projects.

Unique stylish ‘D-Line’ appearance
Saves channelling walls
Patented hinge &, click-lock lid
Self-adhesive
Paintable
Can be shortened arbitrarily
A smart alternative to traditional offers
No sharp edges, gentle on impact
Fully safety tested and certified to BS EN 50085-1:2005
Color: white

Splitter connector for D-Line cable collector quartz circle shaped, seen in four parts.

The D-Line 30 x 15mm Mini cable managment solution offers a subtle appearance to make surface cable installations look attractive! The ½-round shape can blend to resemble the natural top-section of skirting boards, while offering a modern solution for vertical cable drops and runs across ceilings.

Unique stylish ‘D-Line’ appearance
Saves channelling walls
Patented hinge &, click-lock lid
Self-adhesive
Paintable
7 adaptors included to enable popular connections
(3 x 30x15mm x 1m Trunking White)
- 1 x Clip-Over Internal Bend
- 1 x Clip-Over External Bend
- 1 x Clip-Over Flat Bend
- 2 x Smooth Fit Couplers
- 2 x Smooth Fit End Caps
Can be shortened arbitrarily
A smart alternative to traditional offers
No sharp edges, gentle on impact
Fully safety tested and certified to BS EN 50085-1:2005
Color: white

1x Flat Bend: Change direction by 90 degrees on flat surfaces
2x Internal Bend: Join lengths around 90 degree inside corners
2x External Bend: Join lengths around 90 degree outside corners
2x Cable In/Outlet: Takes cables in or out of a trunking. Use between lengths on straight runs.
1x Coupler: Join 2 lengths of same profile on flat surface
2x End Cap: Neatly finish open ends

1x Flat Bend: Change direction by 90 degrees on flat surfaces
2x Internal Bend: Join lengths around 90 degree inside corners
2x External Bend: Join lengths around 90 degree outside corners
2x Cable In/Outlet: Takes cables in or out of a trunking. Use between lengths on straight runs.
1x Coupler: Join 2 lengths of same profile on flat surface
2x End Cap: Neatly finish open ends

Angled joint connectors for D-Line semi-circular cable ducts, set of four parts