Huis & Tuin - pagina 399

Cirkelzaagblad, voor aluminium, 165 mm, 54 tanden

Draadborstel voor metaal, 115 mm, X-LOCK

Draadkopborstel, voor metaal, non-ferrometaal, 75 mm, X-LOCK

F460 Best for Wood and Paint ensures exceptional finishing when sanding and grinding wood as well as painted surfaces. Its F/E backing pads are extremely durable, allowing for continuous sanding and providing professional results. Additionally, the semi-open quality abrasive grains of aluminum oxide and silicon carbide remove material with utmost precision, ensuring perfect surface results. The sanding sheet is designed for flat sanding of edges and edge strips, processing smaller surfaces as well as medium-fine and fine sanding of surfaces, edges, and folds. The sandpaper is also ideal for roughening up or intermediate grinding of primers, putty fillers, and lacquer. The blade is covered with strong semi-open abrasive grains of aluminum oxide and silicon carbide that ensure uniform surface quality. The abrasive sheet is electrostatically open to remove material with high precision ensuring optimal grinding performance. Furthermore the abrasive grain is attached to the F/E backing pads using a fully synthetic resin that ensures high wear resistance for tough tasks while providing long life span.The F460 Best for Wood & Paint Sandpaper fits delta grinders & multi-cutters.
Package contains 5 sheets

F460 Best for Wood and Paint ensures exceptional finishing when sanding and grinding wood as well as painted surfaces. Its F/E backing pads are extremely durable, allowing for continuous sanding and providing professional results. Additionally, the semi-open quality abrasive grains of aluminum oxide and silicon carbide remove material with utmost precision, ensuring perfect surface results. The sanding sheet is designed for flat sanding of edges and edge strips, processing smaller surfaces as well as medium-fine and fine sanding of surfaces, edges, and folds. The sanding sheet is also ideal for roughening up or intermediate grinding of primers, putty filler, and lacquer. The blade is covered with strong semi-open abrasive grains of aluminum oxide and silicon carbide that ensure uniform surface quality. The abrasive sheet is electrostatically open to remove material with high precision ensuring optimal grinding performance. Furthermore the abrasive grain is attached to the F/E backing pads using a fully synthetic resin that ensures high wear resistance for tough tasks while providing long life span.The F460 Best for Wood & Paint Sandpaper fits delta grinders & multi-cutters.
Package contains 5 sheets

Spijkers type 47 hebben een lengte van 16.0 mm met 1.8 mm breedte en 1.27 mm dikte voor houttoepassingen waaronder hardhout/massief hout, zachthout en akoestische panelen.

Ontworpen door Bosch, Spijkers type 47 (Model 2609255809) zijn gespecificeerd als Type 47 en geschikt voor bevestiging in een reeks houtmaterialen waarbij een consistente spijkermaat en -passing vereist zijn.

• Type: 47
• Lengte: 16.0 mm
• Breedte: 1.8 mm
• Dikte: 1.27 mm
• Materialen: hardhout/massief hout, zachthout, akoestische panelen

Do not use on shaft bushings. The collet clamps the milling cutter. Always use the correct size collet to avoid danger during use.
Collet

Best for Concrete diamond cutting disc provides fast cuts in concrete. Its laser-welded diamond cutting segments with a height of 15 mm are sturdy for quick cuts. It has speed stripes integrated into the diamond segment, minimizing side friction, allowing work at high speeds. Additionally, the optimized diamond program provides the fastest cuts. Use this disc for cutting all kinds of concrete

The Standard for Metal cutting disc provides reliable cutting in metal. The aluminum oxide disc is developed for general use with metal. Use this disc for cutting in metal. Bosch cutting discs comply with the maximum safety requirements according to EN 12413. The disc is compatible with angle grinders.
Straight

It is suitable for use with handheld angle grinders. Expert for Metal scrubbing discs provide an impressive long lifespan on metal with maximum safety. Its premium abrasive grain of aluminum oxide, selected functional fillers and additives in a modern phenolic resin binding matrix are particularly suitable for metal applications. In addition, its precision-manufactured fiberglass textile ensures a particularly high disc stability and maximum work safety. It is intended for grinding on metal

Click system for secure locking. The hood fits angle grinders. The protective shield is intended for general scrubbing and grinding work and is equipped with a cover plate for cutting.
Protective caps with cover plate for cutting
Tool-free installation

The movable plate must always be mounted during use. The movable plate is a spare plate for table saws.
Movable plate

If you use a paper filter bag, make sure that the automatic filter cleaning (AFC) is turned off to avoid damaging the paper filter bag.
Paper filter bag

It has easy, stepless adjustment of cutting depth and is equipped with a 35 mm extraction port. The handle of the guide sled can be mounted on both sides to increase safety, while the steep extraction port allows for cutting close to edges. The guide sled is a dust collection shield for angle grinders and does not require tools.
Guide sled with suction hood for cutting
Code clamp, screw closure

The dowel pin is made of beech wood. The dowel pin is professional dowel accessory. This sturdy and user-friendly accessory prevents rotation thanks to its ribbed design. The dowel is suitable for all round wooden dowel joints and comes in diameters of 6, 8, and 10 mm

The reduction ring for circular saw blades has an adjustable holder hole, so the ring fits perfectly on all machines.
Reduction rings for circular saw blades
Stem blade thickness from 1.4 mm to max. 1.7 mm

The reduction ring for circular saw blades has an adjustable holder hole, so the ring fits perfectly on all machines.
Reduction rings for circular saw blades
Stem blade thickness from 2.2 mm to max. 3.0 mm

The reduction ring for circular saw blades has an adjustable holder hole, so the ring fits perfectly on all machines.
Reduction rings for circular saw blades
Stem blade thickness from 1.7 mm to max. 2.2 mm

It has a stepless adjustment for precise indication of the limits of the drilling depth. Designed for use on all materials. This accessory can be used with all common drilling machines and used together with an auxiliary handle. The depth stop (without scale) is made of steel and provides precise drilling depth when using a drill machine.
Depth stop
Fits extra handle 2 602 025 077 and 2 602 025 062
Made of steel, without scale

Safety instruction: Only use Bosch hot air guns with electronic regulation. The plastic welding wire in black can be used for all Bosch hot air guns with electronic regulation.
Plastic welding wire
Polyethylene (HDPE), black

They are for both DIY tasks and professional purposes with staple guns from the following brands: Bostitch, Esco, kwb, Lux, Novus, Rocafix, Rocagraf and Swingline. Fine wire staples of type 58 are ideal for a multitude of general stapling tasks in a wide range of thin materials such as fabrics, paper, flat wooden strips and wire fences. They are particularly suitable for stapling thin materials where the staple back must not be pressed into the material. The staples also have a narrow back that allows them to penetrate deeply into the material and provide a good grip with a very discreet staple back

The narrow-backed staples fit staplers from the following brands: AEG, Bosch, Black+Decker, Bukama, Esco, kwb, Metabo, Novus and Wolfcraft. The narrow-backed staples type 55 are plastic-coated to achieve an adhesive effect that provides a strong and long-lasting hold in a range of different materials. This makes them ideal for both DIY tasks and professional purposes such as installing wall and ceiling cladding with joint and profile board brackets. The staples also have a narrow back that allows them to penetrate deeply into the material and provide a good hold with a very discreet staple back. They are particularly suitable for stapling thin materials where the staple back must not be pressed into the material

They are particularly suitable for fastening thin materials where the staple back must not be pressed into the material. Flat wire staples, type 52, fit Black+Decker staplers. They are ideal for both DIY tasks and professional stapling tasks in a wide range of materials such as thin paper and cardboard, foils, labels and paper. The staples have a narrow back that allows them to penetrate deeply into the material while providing a good grip with a very discreet staple back