Huis & Tuin - pagina 386

Roestvrijstalen deurkruk voor buitendeur. Wordt geleverd met rozetten, cilinderbevestigingen voor ovale cilinder en schroeven voor montage.
Deurdikte: 34-65 mm
Deurkrukspindel: 8 x 8 x 120 mm

COAST DX330 Knife - in blister packThe DX330 is a smart little knife made of a very durable material, with a grooved grip designed to fit your fingers. With this form, the DX330 is easy and comfortable to hold and use daily.This knife has a Double Lock system where you can decide whether the knife should automatically close or whether the knife blade should be locked in open use.DX330 is made with Thumb Studs so you can open the knife with one hand. To do this, press the two small buttons on the knife at once, and the blade will come out. The knife has a clip to attach it securely to clothes. As the DX330 is a good and safe knife to have in the car, it is mounted with a little extra security. The DX300 has a harness cutter, so if an accident happens, you can easily cut your harness off. It also has a glass shredder so you can easily smash a pane if needed. The knife blade is in hard steel with grooves in the blade if you need to cut anything over. Contains DX330 knife.Double Lock syste

Hultafors 414101 waterpas 0,6 m Zwart

Gemaakt van CR.V staal met geborsteld nikkel oppervlak
2-componenten grip - TPR

Torx schroevendraaierset met 5 stuks
Materiaal: CRV staal met mat geslepen blad en zwarte magnetische inkeping
Met ergonomische zeshoekige handgreep
Inhoud:
1 × T10×100 mm
1 × T15×100 mm
1 × T20×125 mm
1 × T25×125 mm
1 × T30×125 mm

Material: PP
Adjustable compartments for personal organization
Dimensions: 37.4×29.4×6.6 cm

2 assortment boxes in one package

Einhell Power-X-Change Plus Batterij/Accu

Batterij-aangedreven Telescopische Heggenschaar HighCut 250/18V P4A Zonder batterij

Houder voor tangen om aan het gereedschapsbord te bevestigen. Wordt geleverd met schroeven.

Clip 3. Lengte 25 mm. Bevat 5 stuks/zak.

HORTUS terrace heater - hanging modelPractical terrace heater from HORTUS. This ceiling-mounted model is ideal if you are looking for supplementary heating for your awning or conservatory, or if you need a patio heater for your covered terrace.The model simply needs to be plugged into an electrical outlet and it is ready to use both indoors and outdoors. The hanging models are made of aluminum with some plastic parts and are available in different strengths. A cover can be purchased as an extra accessory.Modern technology provides efficient heatingThis patio heater is equipped with halogen tubes that emit medium- and short-wave radiation, which heats the surfaces they come into contact with along the way. This gives you very effective and comfortable heat while not wasting energy on heating the air around you.This is both efficient and energy-saving, which is beneficial for both the environment and your wallet. CO2 emissions are significantly lower than old-fashioned gas heaters, making this patio heater much cheaper to operate than traditional gas patio heaters.Terrace Heater Specifications• Model: 211-305• Type: Ceiling-mounted model• Dimensions: H: 37 cm - Ø: 42 cm• Material: Aluminum & Plastic• Tube type: Halogen clear glare • Power levels :600/1500W • Power source :230V - 50Hz • Light reduction :80% • Enclosure class IP24 Coverage area :4-5 m2 - 4-6 people Start-up time :2 sec.Energy utilization ca.:80%Operating cost/hour ca.:1.25 –3 .10 kr.CO2 emission/hour ca.:1 kg Functioning time approx..5000 hours Application Indoor & Outdoor

The HLTCG tooth shape (High-Low Triple Chip Ground) gives the Expert for Multi Material circular saw blade strength to work with abrasive materials. The Multi Material circular saw blade provides powerful cuts in a wide range of materials. Its precision-ground high-quality carbide teeth make the blade strong enough to cut through many different materials, while its core blade, made of dimensionally stable SK5 hardened steel (> 40 HRC), ensures accuracy. At the same time, the expansion slots on the blade reduce vibration during use, which has a noise-reducing effect and reduces heat development. This saw blade is used in non-ferrous metals, aluminum, plastic, epoxy and wood.

DeWALT DT5911-QZ niet gecategoriseerd

A front end driver and a face plate are included in the packageEasy to adjust tool support for exact turning workTailstock + spindle tip as 2nd element for securing the workpieceTorsion-resistant construction thanks to the double guide frame4 speed settings for setting the ideal speed for the materialPowerful 400W motor with higher reserves for longer work sessionsMains supply: 230 V | 50 HzMax. power (S2 | S2time): 400 W | 30 minMax. turning diameter: 280 mmSpindle length: 1,000 mmSpindle speed: 890 | 1,260 | 1,760 | 2,600 min^-1

Makita 1913C9-3 accessoire voor struikmaaiers & grastrimmers

Hellermann Tyton 897-90031 kabelaccessoire Kabelschoen

Makita 18 V Decoupeerzaag T-model

Zigzaglemmet, 5 stuks, T-schacht, lengte: 100 mm, voor Makita DJV182Z

Bahco MW-150 accessoire voor gereedschapskarren

Zaagblad, voor plaatijzer, 5 stuks, lengte: 92 mm

The Expert for Steel circular saw blade has an MTCG tooth configuration (Multi-Purpose Triple Chip Grind) that ensures a long lifespan. The Expert for Steel circular saw blade provides extreme impact resistance in steel. Its special, extra-hard Microteq teeth are internally manufactured by Bosch from extra-durable hard metal grains, providing high cutting performance. The strength is further reinforced by the blade's Proteqtion coating, which prevents corrosion and ensures reliable cutting performance with reduced friction. Additionally, the blade is equipped with anti-vibration holes that provide high cut quality and significantly reduce vibration and noise levels

Boor, voor beton, metselwerk, kalksteen, gewapend beton, 38 mm, SDS-max, lengte: 720 mm

Best for Laminate circular saw blade is durable when cutting all types of laminate flooring. The blade's Proteqtion coating prevents corrosion, ensures reliable cutting performance, and reduces friction. Additionally, this coating keeps the blade cool and protects it from corrosion. The good cutting ability and quality are also improved by the blade's special, extra-hard Microteq teeth, which are internally manufactured by Bosch and consist of durable carbide grains. Furthermore, the blade is designed specifically with anti-vibration holes that significantly reduce vibration and noise, making it easy and comfortable to cut precisely. Best for Laminate circular saw blades have an HLTCG tooth shape (High-Low Triple Chip Ground), making them robust to work with even in very abrasive materials such as laminate flooring. The saw blade is compatible with miter saws and compound miter/ sliding compound miter saws.

The Optiline Wood circular saw blade provides precise cuts in all types of wood. The blade's high-quality precision-ground carbide teeth provide clean cuts, while its core blade, made of dimensionally stable SK5 hardened steel (> 40 HRC), ensures accuracy. At the same time, the blade's expansion slots reduce vibration during use, which has a noise-reducing effect and reduces heat development. This saw blade is used in all types of wood and wood materials. Depending on the number of teeth, different results can be achieved with all Optiline Wood circular saw blades that have ATB tooth geometry (Alternate Top Bevel): when the blade is equipped with a high number of teeth, it provides clean cuts, whereas a low number of teeth provides powerful and efficient cuts. It is compatible with handheld miter saws, compound miter saws and table saws.

Circular saw blade, for wood, 230 mm, 36 teeth