Huis & Tuin - pagina 382

Bosch BETONBOR Zilver SLAGBOR 5.5X85 mm

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, extending the life of the bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

3,73 € (3,08 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch SPIRALBOR 8X65X110MM TRÆBOR

Boor, centreerpuntboor, 8 mm, lengte: 117 mm

4,01 € (3,31 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR SDS P-5 6X160MM

Boorbit

4,86 € (4,02 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR SDS P-5 5X210MM

The SDS plus-5 drill head guarantees trouble-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling, so the user is not burdened. The drill is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

8,23 € (6,80 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch SPIRALBOR 15X100X160MM TRÆBOR

8,91 € (7,36 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BETONBOR SDS-QUICK 6.5X55X100MM

Bosch 2 609 256 904 drill bit 1 pc(s)

6,53 € (5,40 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR HSS-G s 4.5x80MM 10STK

Boor, spiraalboor, 10 stuks, 4.5 mm, cilindrisch, lengte: 80 mm

13,30 € (10,99 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBORSÆT HSS-G 19 STK

Boorset, 19 stuks

31,01 € (25,63 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METAALBORENSET HSS-G Ø1-10MM 18 STUKS

Boorset, voor metaal, non-ferrometaal, staal, gietijzer, gegoten staal, 18 stuks, cilindrisch

30,10 € (24,88 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch SDS-plus-9

40,67 € (33,61 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch SDS-max-9 Break Through

339,90 € (280,91 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch CYL-1

It is compatible with hammer drills. The CYL-1 drill bit is optimized for drilling in masonry. The U-shape with 2 notches ensures efficient dust removal, while the standard carbide tip makes the drill bit extra durable. The product is developed for masonry and limestone.
Stone drill set CYL-1 with 7 pieces

9,83 € (8,12 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch SDS-plus-5

Compatible with SDS plus holder rotary hammers. The SDS plus-5 drill head ensures seamless drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling work, so the user is not burdened. The drill bit is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany.
SDS plus-5 hammer drill set with 3 pieces

12,71 € (10,50 €)

Extern magazijn, 6 - 7 werkdagen levertijd

EGLO BRIDGE-C Accessoires, wit

15,98 € (13,21 €)

Extern magazijn, 5 - 6 werkdagen levertijd

Bosch HAMMERBOR SDS-P P3 14X300/360MM

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders for rotary hammers.
Package contains 1 piece.

14,06 € (11,62 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch DIAMANTBOR VÅD 57X450MM 1 1/4T BEST C

194,56 € (160,79 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR SDS-P P3 8X100/160MM

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders for rotary hammers.
Package contains 1 piece.

5,97 € (4,93 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR SDS-P P3 5X100/160MM

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders for rotary hammers.
Package contains 1 piece.

4,22 € (3,49 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch TRINBOR 9TRIN CYL 4-20MM HSS

The step drill bit is made of HSS (high-speed steel) and provides a long lifespan when used with coolant. Laser-marked numbers on both flutes provide highly visible and durable marking of the hole diameter. Additionally, the 3-flat shank prevents slipping in the drill chuck and provides efficient transmission with high torque. The HSS step drill head delivers smooth, burr-free drilling in multiple diameters with a single bit. It is ideal for deburring, drilling round holes, and enlarging existing ones. No center punch is needed because the split point allows for easy starting. Its CNC-ground flute enables optimized chip removal and less vibration for smooth drilling. The most optimal cutting edge and absolute smoothness are ensured thanks to axial and radial relief grinding. This step drill bit is suitable for use on thin materials such as non-ferrous metals, sheet plastic, sheet steel, plastic, and stainless steel.
9 steps Ø 4-6-8-10-12-14-16-18-20 mm

48,52 € (40,10 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch DIAMANTHULSAV 38MM DRYSPEED

It is suitable for use with angle grinders. The Dry Speed diamond blade provides long life when dry drilling in hard ceramic materials. Its premium diamonds provide very high drilling speeds, and its vacuum brazing technology ensures a long lifespan. This product is intended for tiles, from soft wall tiles to very hard floor tiles, such as stoneware

81,36 € (67,24 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR HSS-CO s 7.5X109MM

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly, so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package with one piece.

7,04 € (5,82 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR SDS P-5 8.5X210MM

9,49 € (7,84 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR HSS-G s 4.8X86MM

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers.
Package with one piece.

3,11 € (2,57 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch FLISEBOR EXPERT 3X70MM

The CYL-9 Ceramic tile drill head is a standard drill head for drilling in tiles. The practical drill head is suitable for dry drilling without cooling. The simple design without notches is particularly suitable for drilling in soft to medium-hard tiles. Drilling without impact function at low speeds. The drill head is compatible with power and battery-powered drills with a cylindrical shaft system. Package of 1 piece.

5,97 € (4,93 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR HSS-CO s 6.5X101MM 10STK

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package of 10 pieces.

28,50 € (23,55 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Maandag - Donderdag:	09:00 - 12:00
Vrijdag:	09:00 - 12:00
Weekend en Deense feestdagen:	Gesloten

Telefoon:	085 301 55 55
Email particulier:	[email protected]
Email zakelijk:	[email protected]