Beschermende lenskap, voor HERO3; HERO3+

Makes it easy to add a 1/4-20 mount to any mounting buckle or GoPro mount that uses GoPro mounting fingers.
Use with compatible extension poles to add an invisible 360 pole mount to your existing gear setup.
Crafted from lightweight aluminum for strength and durability.

Ondersteuningssysteem, stuurbevestiging, stuur, poolbevestiging, seat post mount, voor HD HERO2; HERO; HERO+; HERO3; HERO3+; HERO4; HERO6 Black; HERO7 Black, Silver, White

GoPro AFIOD-002 accessoire voor actiesportcamera's

Opnamegreep / klein statief / selfiestick, voor HERO+; HERO10; HERO11; HERO3; HERO3+; HERO4; HERO5; HERO6; HERO7; HERO8; HERO9; MAX

Ondersteuningssysteem, gespbevestiging, voor HERO Session; HERO+; HERO+ LCD; HERO4; HERO4 Session; HERO5; HERO5 Session; HERO6; HERO7

GoPro AGRTM-002 accessoire voor actiesportcamera's Bevestigingsset

1 x Enduro Battery for GoPro HERO13 Black Series

Add compact yet powerful LED lighting to your next adventure or studio setup with Light Mod 2. Increased battery life, runtimes and brightness make it easier than ever to illuminate your subject with wide, smooth, even light for ultra crisp footage. The upgraded design includes a cutout that lets you plug it in while the diffuser’s installed to push capture times even further. Attach it to your GoPro with Media Mod or the Point-and-Shoot Grip,1 or use it as a standalone light with GoPro mounts.

What’s Included 
• Light Mod 2 
• Light Diffuser 
• 2-Finger Adapter 
• USB-C Cable 

Ondersteuningssysteem, clip / magnetische montagesteun, voor HERO5 Black; HERO6 Black; HERO7 Black, Silver, White; HERO8 Black; MAX

Shock Absorbing Rubber Design for GoPro HERO

Help keep your HERO damage-free on adventures with this tough and bumper-like protective sleeve. Its lightweight, shock-absorbing design protects your camera from dings and scratches when you’re on the go—even if you accidentally drop it—without adding a lot of bulk. Simple to install and remove without any tools, plus provides easy access to the camera’s buttons, touch screen, LED, mounting fingers and USB port.

Get the shot when your camera’s out of reach.

The Waterproof Shutter Remote connects to your camera via Bluetooth® and gives you easy control of your camera. Start and stop recording or take a photo with just one button, plus it features an LED light that displays your camera’s recording status. It can be attached to bike handlebars and other gear, or worn using the included wrist extension strap.

Montageset actiecamera, voor HERO10; HERO11; HERO4; HERO5; HERO5 Session; HERO6; HERO7; HERO8; HERO9

Ondersteuningssysteem, voor HD HERO; HD HERO2; HERO+ LCD; HERO3; HERO3+; HERO4 Session; HERO6 Black

Lensdop (pak van 2), voor MAX

Lets you attach the 40in (1m) Carbon Fiber Extension Pole to ski poles.
Perfect for capturing invisible pole shots that can be reframed as POV, selfie and follow cam footage.
Lightweight construction provides strength and durability without weighing down your ski pole.

Upgrade your creative tool kit with this complete wireless mic system. This versatile kit includes two ultra-compact microphone transmitters that can be comfortably worn or hidden while clearly capturing every word of your interview or vlog narration. The included receivers (TRS and USB-C) connect to your DSLR, mirrorless camera or phone to deliver high-quality audio while letting you or your subject roam freely throughout your shot. It all comes in a convenient charging case that makes it easy to take anywhere while keeping the system powered up and ready to record.  

What’s Included 
• 2 Transmitters 
• 2 Windscreens 
• 2 Mounting Magnets 
• 3.5mm TRS Receiver 
• 3.5mm TRS Cable 
• USB-C Receiver 
• Charging Case 
• USB-C Charging Cable 
• Storage Pouch 

Licht op camera, 1 koppen x 10 lamp, LED, gelijkstroom

Driepoot met klem, voor Fusion; HD HERO; HD HERO2; HERO3; HERO3+; HERO4; HERO4 Session; HERO6; HERO7

Includes Dual Battery Charger, 2 Enduro batteries for HERO13 Black and USB-C cable
Optimizes charging so you'll get 2 fully charged batteries as quickly as possible
Dual LEDs let you know the charge status of your camera batteries when inserted, even when the charger is not plugged in
Extra-tall battery slots keep batteries more secure for travel
Comes with 2 high-capacity 1900mAh Enduro batteries for incredible camera performance in various conditions and temperature ranges down to 14°F (-10°C)
Charged Enduro battery gives you over 1.5 hours of continuous recording at 4K30 or 5.3K30, plus over 2.5 hours of continuous recording at 1080p30
Included batteries can be used as replacements or spares for the one that came in-box

Magnetic Latch Mount for GoPro HERO13 Black Series

4 smart ND Filters for motion blur

Attach one of these premium HB-Series neutral density (ND) filters, and your HERO13 Black automatically detects it and shifts into Auto Cinematic video mode so you can create motion blur with ease. Advanced users can select the Auto 180° shutter setting, or manually configure the shutter speed and exposure settings to fine-tune a shot for the lighting conditions. Made from scratch-resistant, high-optical quality glass and waterproof when installed.

The best moments don’t wait—and neither should you. LIT HERO is the small, simple, durable camera that can go anywhere and capture anything. Whenever and whatever the moment, LIT HERO is ready.

Packs Light
LIT HERO is small and lightweight. Toss it in your bag or pocket and always have it on you. 
Built with GoPro DNA making it durable and waterproof to 16ft (5m).

Real. Easy.
Simplified controls with 4 capture modes get every shot while you stay in the moment.
16:9 Video: 4K30 widescreen
4:3 Video: 4K30 tall
Slo-Mo: 4K60 2x slow motion
Photo: 12MP single photo

Built-in Light
Three levels of brightness so you can capture from sun up to lights out.

Click it + Rip it With Magnetic Mounting
Plus built-in mounting fingers that make LIT HERO compatible with any GoPro mount and 1/4-20 mounting threads for use with industry standard tripods and accessories.

Opnamegreep / klein statief / selfiestick

Transform your MISSION 1 Series camera into a classic point-and-shoot with this lightweight ergonomic camera grip. Just snap it in place to help you capture immersive, handheld points of view of street scenes, concerts or road trips. Cold shoe mounts on both the frame and shutter mechanism let you add on a variety of accessories. The frame also comes with 1/4-20 mounting and easy access to your camera’s magnetic latch and finger mounting options so you can swap setups in seconds. Remove the grip and shutter mechanism to use the durable metal frame on its own. 

What’s Included 
• Frame  
• Shutter Mechanism 
• Grip  

Compatibility  
• MISSION 1 PRO 
• MISSION 1