Gereedschap - pagina 63

Coaxiale kabelstripper
met openingsveer en vergrendelingshendel

Air Compressor Accessory, Reduction R3/8" AG-R1/4" AG

Air Compressor Accessory, Distributor, 2 Quick C. R3/8"

KNIPEX 00 19 41 Gereedschapsroltas 11-delig

Opbindingsdraad - 6 meter - zacht

Double push-bar for exact and user-friendly handlingSpring lock on both sides for storage in minimum spaceHousing made of high-grade, impact-resistant plasticAdjustment lever for regulating the distribution rateCorrosion-resistant rollerSpreading width: 45 cmCapacity of grit box: 12 LWheels diameter: 200 mm

Dimensionally stable suction hose with 25 mm diameterLength: 4 metresBrass connection 42 mm (1 1/4 inch) ITIncl. adapter piece with 33.3 mm (1 inch) ITIncl. brass threaded nipple with 33.3 mm (1 inch) ETIncl. brass suction strainer with integrated non-return valve

Bahco 3833-22-C gatenzaag

Bahco 8166 moersleutel adapter & extensie

Einhell 3424130 schrobborstel Zwart

Moersleutel, 173.5 mm, in houder

It is intended for use on planers. The polishing pad is intended for pre-polishing dirty or scratched lacquered surfaces using polish or abrasive paste

Doorslijpschijf voor tegel- en steenwerk, ontworpen voor marmer met een diameter van 23 cm, 2.2 cm boring, 2.4 mm snijbreedte en 5 mm segmenthoogte.

Bosch Diamond Cutting Disc Tiles is een metalen doorslijpschijf, geleverd als 1 stuk per verpakking en vermeld als compatibel met alle merken.

Nieten leveren Type 57-bevestiging met een breedte van 10.6 mm, een dikte van 1.25 mm en een lengte van 10.0 mm.

Bosch Nieten type 57 van Bosch zijn ontworpen voor gebruik op uiteenlopende materialen, waaronder papier, kunststofplaten, primerfolie, behanglijm, houten akoestische panelen en met glasvezel versterkte kunststof (GFK).

The narrow-backed staples fit staplers from the following brands: AEG, Bosch, Black+Decker, Bukama, Esco, kwb, Metabo, Novus and Wolfcraft. The narrow-backed staples type 55 are plastic-coated to achieve an adhesive effect that provides a strong and long-lasting hold in a range of different materials. This makes them ideal for both DIY tasks and professional purposes such as installing wall and ceiling cladding with joint and profile board brackets. The staples also have a narrow back that allows them to penetrate deeply into the material and provide a good hold with a very discreet staple back. They are particularly suitable for stapling thin materials where the staple back must not be pressed into the material

The reduction ring for circular saw blades has an adjustable holder hole, so the ring fits perfectly on all machines.
Reduction rings for circular saw blades
Stem blade thickness from 1.4 mm to max. 1.7 mm

Series 100 VDE 160 iS/7 Rack, Schroevendraaierset, 7 stuks, geïsoleerd

Safety instruction: Only use Bosch hot air guns with electronic regulation. The welding shoe for the hot air gun is a nozzle with a side channel for supplying plastic welding wire with a diameter of up to 5 mm. It must be used in combination with a narrowing nozzle with a diameter of 9 mm.
Welding shoe
with side channel for supplying plastic welding wire up to Ø 5 mm. In connection with narrowing nozzle Ø 9 mm

Parallelgeleider

The holder-mounted countersink drill, countersinks and edge mills efficiently in a single step in wood. The countersink is mounted on a dowel drilling head, solves all three tasks in an inexpensive and efficient way, and guarantees impressive results. The countersink is suitable for hard and soft wood, laminated and non-laminated chipboards and plywood. This multifunctional bit, made of tool steel, has a 90-degree chamfer angle, five cutting edges, and can also be used as a depth stop. Supplied with hex key; dowel drilling head not included. The countersink is intended for drill stands and screwdrivers.

Rubberen schuurschijf voor haakse slijpers met klittenbandsysteem in 125 mm diameter, uitgevoerd in zwart.

Bosch Rubber schuurschijf voor haakse slijpers, klittenband, 125 mm wordt geleverd als 1 stuk en is ontworpen voor compatibele klittenband-schuuropstellingen.

Heavy-duty metal cup brush provides an extra coarse surface finish. This cup brush is equipped with braided wire for demanding cleaning tasks. It is ideal for use on metal and suitable for cleaning medium to large steel surfaces, such as removing heavy rust, undercoating, paint or varnish. The bristles are available in different thicknesses depending on how strong the abrasive effect needs to be. Thicker wires are more aggressive and provide a coarser but faster surface finish, while thinner wires provide finer, smoother surface results. It is designed for use with angle grinders with M14 thread.
Steel Cup Brush - Twisted Wire
Suitable for demanding cleaning tasks on medium to large metal surfaces such as removing rust or undercoating, removing paint or varnish.
Fits angle grinders with M 10 or M 14 thread and GGS 6 S Professional

The fine wire staples fit staplers from the following brands: AEG, Arrow, Black+Decker, Bosch, Esco, kwb, Maestri, Mekano, Metabo, Neckermann/Bullcraft Novus Outifrance Piranha Rocagraf Stanley Skil and Wolfcraft. The fine wire staples type 53 are ideal for a multitude of general DIY tasks and professional stapling jobs. They are suitable for a wide range of thin materials such as fabrics paper flat wooden mouldings and wire mesh fencing. In addition the staples are particularly suitable for applications where the staple back should not be pressed into the material. The staples have a narrow back that allows them to penetrate deeply into the material providing good grip with a very discreet staple back