Gereedschap - pagina 56

KNIPEX 00 20 01 V17 Tangenset met schuimrubberen inlay

eSafe Serie 320 koppeling is een gemakkelijk te hanteren, hoog presterende koppeling met een lange levensduur. eSafe is een veiligheidskoppeling die met één hand bediend kan worden en ontlucht voordat deze losgekoppeld wordt, waardoor het risico op slangbreuk wordt geëlimineerd. Mannelijke schroefdraden op de koppelingen en nippels zijn voorzien van vooraf aangebrachte draadafdichtmiddel. De koppelingen hebben een kleinere buitenafmeting dan vergelijkbare ontwerpen. Volledig automatische werking zorgt voor gemakkelijke bediening. eSafe voldoet aan ISO-standaard 4414 en EN 983.Serie 320 is ook verkrijgbaar in standaard-, Soft-Line- en Multi-Link-versies

Einhell TE-AC 6 Silent luchtcompressor 550 W 110 l/min

Be ready for any household task with this striking hammer which is also a handy 6-in-1 screwdriver set.The brass handle unscrews to reveal a handsome screwdriver with a rugged grip. Extra driver heads can be stored in the base of the screwdriver. Comes with nickel plated claw hammer head, and two flat head and two phillips head tips.

Ridgid snijolie synthetisch 500 ml

Impact socket and adapter set, 8 stuks, lengte: 23 mm

eSafe Serie 320 koppeling is een gemakkelijk te hanteren, hoog presterende koppeling met een lange levensduur. eSafe is een veiligheidskoppeling die met één hand bediend kan worden en ontlucht voordat deze losgekoppeld wordt, waardoor het risico op slangbreuk wordt geëlimineerd. Mannelijke schroefdraden op de koppelingen en nippels zijn voorzien van vooraf aangebrachte draadafdichtmiddel. De koppelingen hebben een kleinere buitenafmeting dan vergelijkbare ontwerpen. Volledig automatische werking zorgt voor gemakkelijke bediening. eSafe voldoet aan ISO-standaard 4414 en EN 983.Serie 320 is ook verkrijgbaar in standaard-, Soft-Line- en Multi-Link-versies

The hand sanding block is ideal as a grinding support for all types of hand sanding work. It has different hardness on each side, a hard and a soft side, for grinding different surfaces with the same block. It is equipped with a Velcro closure system and is intended for use with all standard sanding blades and pieces of abrasive rolls.
Cork sanding block, small

The adapter with 8 holes is intended as a soft intermediate layer for grinding contours and curved surfaces. It is designed for use on surface grinders.
Adapter, with holes

The Standard for Metal grinding disc is a reliable choice for metal grinding work. Its abrasive grains in aluminum oxide are suitable for common metal applications. It is intended for use in metal grinding. Maximum work safety thanks to the optimal three-layer fiberglass netting. Manufactured in accordance with EN12413, it is suitable for use with handheld angle grinders

Doorslijpschijf levert Bosch-kwaliteit voor XL Multiwheel-gebruik in een 125 mm HM-uitvoering, geleverd als 10-pack.

Bosch Cutting Disc XL Multiwheel 125mm HM 10 pcs is een Bosch accessoire ontworpen voor Multiwheel-toepassingen, met een 125 mm doorslijpschijfformaat en geleverd in een verpakking van 10.

Headless pin, 2000 stuks, lengte: 40 mm, breedte: 1.3 mm, voor Makita DBN600RTJ, DBN600Z, DBN600ZJ

Reciprozaagbladenset, voor hout, metaal, 3 stuks

Wood&Metal EXTRA briljant

600 ml container
Individueel instelbaar voor grootte en snelheid
Voor veeleisende en bijzonder gladde werkstukken

Deze Shurlite vonkontsteker is ontworpen voor de lasindustrie en is in staat om elk brandbaar gas aan te steken.

Click system for secure locking. The hood fits angle grinders. The protective shield is intended for general scrubbing and grinding work and is equipped with a cover plate for cutting.
Protective caps with cover plate for cutting
Tool-free installation

They are intended for the Bosch staple gun PTK 14. The staples, type 48, are for fastening thin materials. They are made of hard steel wire with a length of 14 mm

The narrowing nozzle for the hot air gun can be used with all Bosch hot air guns. The narrowing nozzle for the hot air gun has a diameter that is only half of other nozzles, making it ideal for use in corners. It is also perfect for concentrating the hot air flow on small surfaces for soldering and other purposes.Narrowing nozzle with halved diameter for working with or concentrating heat beam on small surfaces, e.g. when soldering

The hammer stapler gun is suitable for packaging, decoration or insulation tasks. The pistol's impact trigger causes the staples to be shot into the material with tremendous force when struck. It is equipped with a finger protector for safe use. The magazine can hold up to 200 staples for quick attachment to textiles, foils, paper and insulation materials.Hammer stapler gun HMT 53Suitable for packaging, decoration or insulation tasks, etc.Handle with finger protection, magazine holds up to 200 staplesFits staple type 53, length 4, 6, 8 mm

Heavy-duty metal cup brush provides an extra coarse surface finish. This cup brush is equipped with braided wire for demanding cleaning tasks. It is ideal for use on metal and suitable for cleaning medium to large steel surfaces, such as removing heavy rust, undercoating, paint or varnish. The bristles are available in different thicknesses depending on how strong the abrasive effect needs to be. Thicker wires are more aggressive and provide a coarser but faster surface finish, while thinner wires provide finer, smoother surface results. It is designed for use with angle grinders with M14 thread.
Steel Cup Brush - Twisted Wire
Suitable for demanding cleaning tasks on medium to large metal surfaces such as removing rust or undercoating, removing paint or varnish.
Fits angle grinders with M 10 or M 14 thread and GGS 6 S Professional

Do not use on shaft bushings. The collet secures the milling cutter. Always use the correct size collet to avoid danger during use.
Collet
Intended for POF 400/500 and POF 52/50

The protective shield without cover plate is intended for general grinding work. It has a screw closure and can be securely locked with a code. The protective shield is manufactured according to EN/EC 60745 and is compatible with angle grinders.Protective shield without cover platewith coded clasp and screw closure

The reduction ring for circular saw blades has an adjustable holder hole, so the ring fits perfectly on all machines.
Reduction rings for circular saw blades
Stem blade thickness from 1.7 mm to max. 2.2 mm

The disc should be centered on the support edge and not the nut. It is suitable for use with AdvancedGrind 18, GWS 18V-10 C, GWS 18V-10 SC. Quick-lock nut with M14 rod