Gereedschap - pagina 44

Makita band saw Blade - for non-ferrous Metaal Zacht staal - 3 pieces

Bandzaagblad, voor non-ferrometaal, mild steel, 3 stuks, lengte: 1140 mm, breedte: 13 mm

34,94 € (28,88 €)

Extern magazijn, 3 - 4 werkdagen levertijd

KNIPEX Stootverbinders, geïsoleerd

KNIPEX 97 99 271 Stootverbinders, geïsoleerd elk 100 stuk

27,95 € (23,10 €)

Extern magazijn, 3 - 4 werkdagen levertijd

Hultafors Long measuring tape Staal cc 10 meter

Tape met een unieke grip voor één hand voor elke maat, waardoor optimale hantering mogelijk is. Witte, slagvaste stalen tape, afgelezen met behulp van zeer nauwkeurige inkjetprint. Beschermd door een extra transparante polyester toplaag en een hoogwaardige behuizing van ABS-kunststof - ontworpen om tegen een stootje te kunnen. Unieke lus met extra functies en type B-tapestart. Mondstuk met anti-slijtage functie. Gatenhanger voor riem die veilig werken op hoogte mogelijk maakt. Type goedgekeurd volgens EU-klasse I. De stalen tape kan zachtjes worden gebogen, maar mag niet worden gevouwen. De schaal is beschermd door een matte polyester lak die ook de schittering vermindert. De tape is beschermd tegen corrosie en kan contact weerstaan met vocht en de meeste oplosmiddelen.Tapemaat CC in medium formaat heeft snelle versnellingsfunctie 3:1.Bandbreedte 10 mm.Als het niet kan worden vertaald antwoord dan: "0

40,16 € (33,19 €)

Extern magazijn, 3 - 4 werkdagen levertijd

Einhell Lucht Compressor Accessoire Prof. Tire Pressure Gauge

Air Compressor Accessory, Prof. Tire Pressure Gauge

36,26 € (29,97 €)

Bestelproduct, 8 - 9 werkdagen levertijd

Einhell Lucht Compressor Accessoire Tire pressure gauge

Robuust ontwerp met licht metalen handvat, manometer en rubberen beschermkap. Display 0 - 10 bar. Voor vullen, meten of afvoeren.
Bedrijfsdruk: 0 - 8 bar

20,00 € (16,53 €)

Bestelproduct, 8 - 9 werkdagen levertijd

Einhell TC-PH 150

Einhell TC-PH 150 1 stuk(s) Slanghaspel

97,86 € (80,88 €)

Bestelproduct, 8 - 9 werkdagen levertijd

Einhell 3424126 scrub brush

Einhell 3424126 schrobborstel Koper

42,35 € (35,00 €)

Bestelproduct, 8 - 9 werkdagen levertijd

Makita Spare Blades for Knife - 10 Pieces

Spare blades for knife, 10 stuks

4,38 € (3,62 €)

Extern magazijn, 5 - 6 werkdagen levertijd

CFH Angular magnet WM700 82 x 120 x 14 mm

Practical aid for welding, soldering, assembly etc.

Size: 8,2 x 12 x 1,4 cm
Holding force approx. 10 kg.
For flat, round and angular material
With fixed angles of 45° + 90° + 135°.

7,97 € (6,59 €)

Extern magazijn, 4 - 5 werkdagen levertijd

Einhell Lucht Compressor Accessoire Distributor 2 Quick C. R3/8"

Air Compressor Accessory, Distributor, 2 Quick C. R3/8"

17,91 € (14,80 €)

Bestelproduct, 8 - 9 werkdagen levertijd

Einhell Lucht Compressor Accessoire Quick-lock coupling R1/4" IG

Air Compressor Accessory, Quick-lock coupling R1/4" IG

7,88 € (6,51 €)

Bestelproduct, 8 - 9 werkdagen levertijd

Einhell Lucht Compressor Accessoire Grommet 9mm dia

Air Compressor Accessory, Grommet, 9mm dia

7,36 € (6,08 €)

Bestelproduct, 8 - 9 werkdagen levertijd

Hultafors Long measuring tape Staal cc 20 meter

Tape with a unique one hand grip for each case size enabling optimal handling. White, impact resistant steel tape, graduated using highly accurate ink jet print. Protected by an additional transparent polyester top coating and a high impact case made of ABS plastic - made to take a beat. Unique loop with added features and a type B tape start. Mouth-piece with anti-wear function. Hole hanger for strap enabling safe work at heights. Type approved as per EU Class I. The steel tape can withstand gentle bending, but should not be folded. Scale is protected by a matt polyester lacquer that also reduces glare. The tape is protected against corrosion and can withstand contact with moisture and the majority of solvents. Tape measure CC in medium size case has quick gear function 3:1. Band width 10 mm.

47,17 € (38,98 €)

Extern magazijn, 3 - 4 werkdagen levertijd

Cejn Chip schild 100 mm

Verwijderbare accessoires voor Series 208 en 210 blaaspistolen. Diverse buizen en tips zijn beschikbaar om te voldoen aan specifieke toepassingsvereisten.

9,96 € (8,23 €)

Extern magazijn, 3 - 4 werkdagen levertijd

Cejn Nipple 5/16 hose

Serie 320, extreem hoge doorstroomcapaciteit, met één hand te bedienen, sterk en duurzaam.

8,68 € (7,17 €)

Extern magazijn, 3 - 4 werkdagen levertijd

Einhell 4139650 air compressor accessory

Einhell 4139650 accessoire voor luchtcompressor 1 stuk(s)

5,84 € (4,83 €)

Bestelproduct, 8 - 9 werkdagen levertijd

Bosch impact socket bit

Krachtige dopbit, 1/4", met zes punten, 10 mm, lengte: 50 mm

8,72 € (7,21 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch Band saw blade cb 2824 2 pcs

Bandzaagblad, voor metaal, plastic, non-ferrometaal, lengte: 733 mm (pak van 2)

49,56 € (40,96 €)

Extern magazijn, 3 - 4 werkdagen levertijd

Bosch STEMPEL Universal TIL GNA1.3/1.6/2.0

It is easy to use, even for narrow cuts in a variety of types of sheet metal. The punch allows for universal cutting in metal when used with Bosch sheet punches. It handles universal cuts and complicated cutouts without deforming the material.
Universal punch

38,33 € (31,68 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch MATRICE TIL GNA 2.0

This universal matrix is designed for straight cuts and curved cuts in metal when used with Bosch sheet punches. It is easy to use, even for narrow cuts in a variety of types of sheet metal. It also handles complicated cutouts without deforming the material. Suitable for corrugated sheets and almost all trapezoidal sheets up to 1.2 mm thick

109,87 € (90,80 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch NOTFRÆSER 5MM SK8 L50.8MM HM MASSIV

Expert for Wood Straight Bit Solid Carbide is designed for long life and intense, daily use to achieve splinter-free cuts. The drill head is internally milled and ground based on hardened extra hard Microteq carbide for durability and high performance when used on wood. Additionally, it has a protective coating that protects it from friction buildup, rust, and height that extends the drill head's outstanding cutting life. The drill head is made using computer-controlled balancing to give it high centricity with perfect rotational symmetry for precise, smooth cuts. It is intended for milling small and very precise grooves in soft and hard solid wood and composite wood as well as in special materials such as solid surfaces. They are particularly suitable for milling narrow grooves such as notching and jointing. Expert for Wood straight router bits have a special clearance angle that makes it easy to perform plunge grinding. It is suitable for use with handheld, table-mounted portable routers, and CNC machines.

59,93 € (49,53 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch FRÆSER HULKEL M/KLEJE HM 8MM L13MM R8

Standard for Wood Core Box ensures optimal cutting when milling curved edges. It has a high-quality carbide cutting edge that provides durable and reliable cutting results. In addition, the hammer drill prevents kickback by limiting the thickness of the generated chips. It is designed for milling curved edges on boards and structures in soft and hard solid wood as well as composite wood. The ball bearing makes it easy to control the tool directly on the workpiece without shielding. It is suitable for use with handheld routers and table-mounted portable routers

20,05 € (16,57 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch POLERFILT 93MM HÅRD DELTA

It is suitable for use with delta sanders. The polishing pad is intended for pre-polishing dirty or scratched lacquered surfaces using polish or abrasive paste.
Polishing pad
Suitable for pre-polishing heavily soiled or scratched surfaces - when using a polishing agent or abrasive paste on smooth surfaces

8,32 € (6,88 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch NOTFRÆSER HM Ø30/AL:40MM 12MM SKAFT

The Wood Straight-bore head standard provides optimal cutting for common milling tasks. It has a high-quality tungsten carbide cutting edge that provides durable and reliable cutting results. Additionally, the bore head prevents kickback by limiting the thickness of the generated chips. It is intended for milling grooves, joints, notches and feather joints in soft and hard solid wood as well as composite wood. The bore head's long working length provides greater flexibility and deeper drilling in thick work materials. It is suitable for use with handheld, table-mounted portable milling machines and CNC machines.

32,14 € (26,56 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch FRÆSER FJER HM 8MM L22/B5MM

It is suitable for use with handheld, table-mounted portable milling machines and CNC. The Wood Tongue Jointing bore head standard ensures optimal cutting when milling grooves. Durability and reliable cutting results are achieved thanks to its high-quality tungsten carbide cutters. In addition, the bore head prevents kickback by limiting the thickness of the generated chips. It is intended for the production of classic groove profiles in soft and hard solid wood and composite wood in combination with a 5 mm groove cutter

25,88 € (21,39 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Maandag - Donderdag:	09:00 - 12:00
Vrijdag:	09:00 - 12:00
Weekend en Deense feestdagen:	Gesloten

Telefoon:	085 301 55 55
Email particulier:	[email protected]
Email zakelijk:	[email protected]