Gereedschap - pagina 102

It is compatible with an SDS plus chisel attachment, or it can be used directly in SDS plus rotary hammers with rotation stop. The SDS plus pointed chisel can be used for standard chiseling for various remediation and renovation tasks. The chisel is equipped with a tapered edge and is intended for adaptation work, destruction or removal of walls, renovation of joints and clearing of reinforcements for use in concrete and bricks.
Pointed Chisel
SDS plus pointed chisel for standard chiseling in connection with various remediation and renovation tasks in concrete and bricks

It is intended for use on planers. The polishing pad is intended for pre-polishing dirty or scratched lacquered surfaces using polish or abrasive paste

The fine wire staples fit staple guns from the following brands: AEG, Arrow, Black+Decker, Bosch, Esco, kwb, Maestri, Mekano, Metabo, Neckermann/Bullcraft Novus Outifrance Piranha Rocagraf Stanley Skil and Wolfcraft. The fine wire staples type 53 are ideal for a multitude of general DIY tasks and professional stapling jobs. They are suitable for a wide range of thin materials such as fabrics paper flat wooden mouldings and wire mesh fencing. In addition the staples are particularly suitable for applications where the staple back should not be pressed into the material. The staples have a narrow back that allows them to penetrate deeply into the material providing good grip with a very discreet staple back. Weather-resistant stainless steel staples

They are intended for use with parallel guide 2 607 001 387 and router circle cutter 2 609 200 143 and are suitable for routers. The extra-long guide rods extend up to 800 mm when greater length is required.
Guide rod
Fits all routers with a guide rod diameter of 10 mm, hole spacing of100 mm

System accessory PRR 250 ES; Lamella roller

The narrow-backed staples fit staplers from the following brands: AEG, Bosch, Black+Decker, Bukama, Esco, kwb, Lux, Metabo, Novus and Wolfcraft. The narrow-backed staples type 55 are ideal for general DIY tasks and professional stapling tasks. They provide extra strong joints and are ideal for a wide range of thin and also thicker materials. The staples have a narrow back so they can penetrate deeply into the material and provide a good grip with a very discreet staple back. They are particularly suitable for stapling thin materials where the staple back must not be pressed into the material

They can be used for staplers from AEG, Bosch, Esco, Kwb, Lux, Mekano, Metabo, Novus, Peugeot, Rocafix , Rocagraf , Stanley , Swingline and Wolfcraft. The staples type 47 are for fastening thin and thick materials. They are made of hardened steel wire with a length between 16 and 30 mm. The width of the head is 1.8 or 2.8 mm depending on the device

The crevice tool fits vacuum hoses on Bosch vacuums. The crevice tool is specially designed to reach hard-to-access places. It is ideal for reaching into corners and down into joints.
Crevice nozzle

The vacuum cleaner tube is intended for Bosch vacuum cleaners.
Tube

Designed for all Bosch hot air guns. The glass protection nozzle for the hot air gun has special side protectors that protect heat-sensitive materials such as glass.
Glass protection nozzle with special side protection. Protects heat-sensitive materials such as glass

It is intended for use with planers or for hand grinding. The hole punch punches holes in grinding blades that lack holes. It is made of plastic.
Punching tool in plastic

They are designed for the Bosch compressed air nail gun GSK 18 V-Li Professional. The staples with countersunk head 20°, 1.6/16 g, are made of weather-resistant stainless steel. They are suitable for box construction, furniture upholstery, door and window frames, picture frames, furniture manufacturing, wall cladding and fiber gypsum board. These staples with countersunk head also provide a strong joint with heads that are virtually invisible, making it quick and easy to install board cladding, baseboards and decorative moldings. The staples with countersunk head 20° ,1.6/16 g ,are made in Europe which ensures consistent high quality.
Stainless steel design

Spanmoer

The reducer ring for circular saw blades has an adjustable holder hole, so the ring fits perfectly on all machines.
Reducer rings for circular saw blades
Tooth thickness from 1.7 mm to max. 2.2 mm

Pre-filter, UniversalVac 18

Filter voor EasyVac 3
Robuust, langdurig en bestand tegen stof

Designed for Bosch belt sanders. The sanding sole provides an optimal sanding pattern suitable for very soft sanding. The instruction manual should be read before using the sanding sole.
Fine grinding plate with graphite backing

Platte borstelinzet voor spuitmond
Klemmen met 2 schrapers

Voor EasyImpact 500, 540, 550, 570, 5500 en 6000
Voor UniversalImpact 650,700,730 ,800 ,6700 ,7000 en 8000
Voor PSB, Easy,Easy+, Universal450 ,450 RE ,500 RA en 500 RE. Ook voor PSB-modellen: 5000 RE ,530 RE 560 RE 570 en5700RE. Daarnaast voor PSB-modellen:600 en6000RE62000RE650RA65000RE680RE70000R750 RCA750 RCE750 RCEen800 RCE

Staafvormige kunststoffen, diameter 7 mm.

The holder-mounted countersink drill, countersinks and edge mills effectively in a single step in wood. The countersink is mounted on a dowel drilling head, solves all three tasks in an inexpensive and efficient way, and guarantees impressive results. The countersink is suitable for hard and soft wood, laminated and non-laminated chipboards and plywood. This multifunctional bit, made of tool steel, has a 90-degree chamfer angle, five cutting edges, and can also be used as a depth stop. Comes with hex key; dowel drilling head not included. The countersink is intended for drill stands and screwdrivers.