Bosch Gereedschap - pagina 5

Nietjespistool, zonder snoer inclusief oplader, 3.6 V

The narrow-backed staples fit staplers from the following brands: AEG, Bosch, Black+Decker, Bukama, Esco, kwb, Metabo, Novus and Wolfcraft. The narrow-backed staples type 55 are plastic-coated to achieve an adhesive effect that provides a strong and long-lasting hold in a range of different materials. This makes them ideal for both DIY tasks and professional purposes such as installing wall and ceiling cladding with joint and profile board brackets. The staples also have a narrow back that allows them to penetrate deeply into the material and provide a good hold with a very discreet staple back. They are particularly suitable for stapling thin materials where the staple back must not be pressed into the material

Nietjespistool, zonder snoer inclusief oplader, 3.6 V

Click system for secure locking. The hood fits angle grinders. The protective shield is intended for general scrubbing and grinding work and is equipped with a cover plate for cutting.
Protective caps with cover plate for cutting
Tool-free installation

Maaimachine mes, lengte: 370 mm

Kantenfrees, zonder snoer, spantang 8 mm, geen accu, 18 V

Boorstiftset, voor beton, plastic, staal, zachthout, soft tile, multimaterial, 4 stuks, 6 mm, 7 mm, 8 mm, 5.5 mm, cilindrisch, lengte: 85 mm, 100 mm, 120 mm

Boorstiftset, voor beton, soft tile, hard tile, solid brick, 5 stuks, 6 mm, lengte: 100 mm, 90 mm

Insteekzaagblad, voor metaal, betonijzer snijden, roestvrij staal, staal, window fixing screws, hardened metal, lengte: 91 mm, breedte: 32 mm

Routerbit

The lambswool hood is suitable for polishing old paint and surfaces after sanding. It is intended for use with a Bosch polishing sponge ((1 608 613 013), Bosch felt polishing disc (1 608 612 002) or Bosch backing pad (2,608,601,209). The hood is designed for use on polishing machines.
Polishing hood

Schroevendraaier bit

The oval reserve sanding finger is ideal for sanding in narrow spaces. It is intended for use on Bosch delta sanders.
Sanding tongue, flat

It is suitable for use with handheld, table-mounted portable milling machines and CNC. The Wood Straight-bore head standard ensures optimal cutting for common milling tasks. Durability and reliable cutting results are achieved thanks to high-quality tungsten carbide cutters. In addition, the bore head prevents kickback by limiting the thickness of the generated chips. It is intended for milling grooves, joints, notches and feather joints in soft and hard solid wood as well as composite wood

Boorkopadapter, SDS-plus

Heavy-duty metal cup brush provides an extra coarse surface finish. This cup brush is equipped with braided wire for demanding cleaning tasks. It is ideal for use on metal and suitable for cleaning medium to large steel surfaces, such as removing heavy rust, undercoating, paint or varnish. The bristles are available in different thicknesses depending on how strong the abrasive effect needs to be. Thicker wires are more aggressive and provide a coarser but faster surface finish, while thinner wires provide finer, smoother surface results. It is designed for use with angle grinders with M14 thread.
Steel Cup Brush - Twisted Wire
Suitable for demanding cleaning tasks on medium to large metal surfaces such as removing rust or undercoating, removing paint or varnish.
Fits angle grinders with M 10 or M 14 thread and GGS 6 S Professional

Boschsanding pad for easycurvsander 12 sanding pad for easycurvsander 12

Length mm: 60Width mm: 23Height mm: 4

Doorslijpschijf voor metaal met 115 mm diameter, 22.23 mm boring, 2.5 mm dikte en maximale omtreksnelheid van 80 m/s.

Bosch verzonken doorslijpschijf, metaal is een meerkleurige afkortschijf (specificatie A 30 S BF) compatibel met alle merken en geschikt voor ferrometalen inclusief staal/ijzer en betonstaal.

Nieten type 55 van Bosch met 6.0 mm breedte, 1.08 mm dikte en 18.0 mm lengte voor bevestiging op een reeks materialen, waaronder papier, kunststoffen, folies, behanglijm, houten akoestische panelen en glasvezelversterkte kunststof.

Bosch Niet type 55 is gespecificeerd als type 55 en is geschikt voor toepassingen op materialen zoals natuurlijke materialen zoals papier, kunststoffen en kunststofplaten, coatingmaterialen zoals folies, primerfolie en behanglijm, evenals houten akoestische panelen en glasvezelversterkte kunststof (GFK).

Nieten type 53 van Bosch met 11.4 mm breedte, 0.74 mm dikte en 14.0 mm lengte voor het bevestigen van diverse materialen.

Bosch Type 53 nieten zijn gespecificeerd voor gebruik met natuurlijke materialen, textiel/stof, tapijt, houten akoestische panelen en kunstgrasmatten, waardoor ze geschikt zijn voor uiteenlopende bevestigingstaken.

Beitel met SDS plus-compatibiliteit, 250 mm totale lengte en 22 mm totale breedte voor werk aan steen, metselwerk, beton en tegellijm.

Bosch Channel Chisel SDS plus is een Bosch-gereedschap voor materiaalverwijdering, dat het SDS plus-schachtsysteem combineert met een compact profiel, geschikt voor gangbare sloop- en voorbereidingsklussen.

The flat wire staples fit staple guns from the following brands: Arrow, Black+Decker, Bosch, Bostitch, Emhard, Esco, kwb, Maestri, Mekano, Outifrance Peugeot Rapid and Rocafix. The type 57 flat wire staples are ideal for a multitude of general stapling tasks and can be used on many different materials. They easily handle both DIY tasks and professional purposes on thin paper and cardboard, foils labels paper etc. The staples have a narrow back that allows them to penetrate deeply into the material and provide a good grip with a very discreet staple back. They are particularly suitable for stapling thin materials where the staple back must not be pressed into the material.