Bosch Gereedschap - pagina 17

Nieten bieden Type 51-compatibiliteit met een 10.0 mm breedte, 1.00 mm dikte en 10.0 mm lengte voor nauwkeurige bevestiging.

Bosch Klammer type 51 is gespecificeerd als Type 51 nieten en is geschikt voor gebruik met materialen waaronder natuurlijke materialen/papier, gecoate materialen/folie, kunststof/kunststofplaten, gecoate materialen/primerfilm, gecoate materialen/behanglijm, hout/akoestische panelen en kunststof/glasvezelversterkte kunststof (GFK).

Nieten type 52 van Bosch met 12.3 mm breedte, 1.25 mm dikte en 8.0 mm lengte voor bevestigingswerk.

Bosch Nieten type 52 zijn gespecificeerd voor gebruik met diverse materialen, waaronder papier, kunststoffen en kunststofplaten, bekledingsmaterialen zoals folies, primerfolie en behanglijm, evenals houttoepassingen zoals akoestische panelen en glasvezelversterkte kunststof (GRP).

Boschsanding plate in multih 125mm soft

Voor lamellenfreesmachines worden gebruikt voor het frezen van verbindingen voor 4 mm lamellen. Het freest sterke verbindingen met een perfecte pasvorm in massief hout en samengesteld hout.
Schijfsnijders

It is made of lightweight plastic. For circular saws. The plastic transport case is used for safe storage and transport of Bosch Power Tools

Chisel designed for removing large areas of roughcast and light masonry demolition work. Wide flat chisel for knocking down plastered walls, breaking up and loosening soil, floor coverings and bitumen.

It is easy to use, even for narrow cuts in a variety of types of sheet metal. The punch allows for straight cuts in metal when used with Bosch sheet punches. It handles straight cuts and complicated cutouts without deforming the material.
Punch for straight cuts

Staples, Typ 57, 10.6 x 8 x 1.25 mm, metalen draad, verpakking van 1000

The Standard for Stone diamond cutting disc provides efficient cuts in all types of stone. Its optimized diamond program ensures a good result thanks to the disc's high quality standards, which are ensured by Bosch's diamond competence center in Switzerland. Use this disc for cutting all kinds of stones

Best for Concrete diamond cutting disc provides fast cuts in concrete. Its laser-welded diamond cutting segments with a height of 15 mm are sturdy for quick cuts. It has speed stripes integrated into the diamond segment, minimizing side friction, allowing work at high speeds. Additionally, the optimized diamond program provides the fastest cuts. Use this disc for cutting all kinds of concrete

They are intended for use on planers. Grinding plates for planers are designed for grinding paint, putty and plaster. They come in a range of different hardnesses depending on the material and desired surface result.
Grinding plate

The brush provides a good, fine surface finish. It is equipped with wavy wire for easy and moderately demanding cleaning tasks on small steel surfaces. Its shape makes it ideal for cleaning in very difficult to reach places such as corners and the inside of pipes and profiles. The brush is also suitable for removing rust, roughening, sanding and grinding paint. The bristles are available in different thicknesses depending on how strong the abrasive effect needs to be. Thicker wires are more aggressive and provide a coarser but faster surface finish, while thinner wires provide finer, smoother surface results. It is intended for use with drills with a 6 mm shaft.Brush - wavy wire
Optimally suited for processing very difficult to reach places.
Suitable for light cleaning tasks in corners as well as internal processing of pipes and profiles such as rust removal, roughening, matting or removing paint.

It is intended for delta sanders of the type GDA280 E Professional, PDA180, PDA180E, PDA240E and PSM160A. The Velcro closure is an accessory for attaching sanding discs to the flap sander attachment for delta sanders. Spare material with Velcro for flap sander paper attachment

Voor EasyImpact 500, 540, 550, 570, 5500 en 6000
Voor UniversalImpact 650,700,730 ,800 ,6700 ,7000 en 8000
Voor PSB, Easy,Easy+, Universal450 ,450 RE ,500 RA en 500 RE. Ook voor PSB-modellen: 5000 RE ,530 RE 560 RE 570 en5700RE. Daarnaast voor PSB-modellen:600 en6000RE62000RE650RA65000RE680RE70000R750 RCA750 RCE750 RCEen800 RCE

Sisal koord borstel voor het voorpolijsten.

Deze cirkelzaag verloopring heeft een verstelbaar gat waardoor hij perfect op elke machine past.
Het gat werkt met of zonder verloopringen voor verschillende maten.
Kostenbesparing door het uitwisselen van gereedschap/zaagbladen voor verschillende gatmaten.
Geweldige flexibiliteit voor compatibiliteit met alle merken.
Leveringsomvang: 1 x verloopring voor cirkelzaagblad: diameter 15 mm, gat 10 mm, dikte 0,55 mm

The cup steel brush provides an excellent, fine surface finish. The brush has wavy wire for light to moderately demanding cleaning tasks. It is suitable for removing coatings and rust and for cleaning formwork boards and cladding. This brush is ideal for use on steel surfaces and is also suitable for roughing, sanding, and paint stripping. The bristles are available in different thicknesses depending on how strong the abrasive effect needs to be. Thicker wires are more aggressive and provide a coarser but faster surface finish, while thinner wires provide finer, smoother surface results. It is intended for use with drills with a 6 mm shaft.
Cup Steel Brush - Wavy Wire
Suitable For Light to moderately demanding cleaning tasks on small to medium-sized metal surfaces such as removing coatings, rust removal, cleaning formwork boards and facades, roughening,sanding,and paint stripping.

The dowel setter is made of tool steel. The dowel setter makes it easy to mark dowel holes. The dowel setter enables quick and uncomplicated marking of holes, which makes your work easier. Dowel setting set with 4 parts

The dowel setter is made of tool steel. The dowel setter makes it easy to mark dowel holes. The dowel setter enables quick and uncomplicated marking of holes, which makes your work easier. Dowel setter set with 4 pieces

The angle milling chair is designed for the Bosch edge milling machine GKF 600 Professional. The angle milling chair is particularly suitable for edge milling of laminated edges in hard-to-reach places. It is also suitable for milling special angles and chamfering edges.
Angle Milling Chair

Handvat M 8 met trillingscontrole

Shredder mes

Do not use on shaft bushings. The collet clamps the milling cutter. Always use the correct size collet to avoid danger during use.
Collet

Diamantdoorslijpschijf van Bosch met een diameter van 230 mm en een snijbreedte van 1,7 mm voor het snijden van bouwmaterialen.

Bosch Universal diamantdoorslijpschijf is een diamantdoorslijpschijf ontworpen voor bouwmaterialen, met een zaagblad-/schijfdiameter van 230 mm en een snijbreedte van 1,7 mm voor nauwkeurige sneden.