Gereedschap voor loodgieterswerk - pagina 6

KNIPEX 86 09 300 V01 Bekbeschermers voor 86 XX 300 3 paar

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

Light, portable compact machine. Universal for cutting and deburring pipes. For trade and industry. For the building site and the workshop.Stainless steel pipes of pressfittingsystems, carbon steel, copper Ø 8 – 108 mmSteel pipes EN 10255 (DIN 2440) DN 10 – 100 Ø 14 – 4, Ø 14 – 115 mmCast iron pipes (SML) EN 877 (DIN 19522) DN 50 – 100Plastic pipes SDR 11 Wall thickness s 10 mm Ø 10 – 110 mmMultilayer composite pipes Ø 10 – 110 mmREMS Cento – Cutting and deburring up to Ø 115 mm. Super fast. Right angled. Chip-free. No outer burr. Dry cutting. Universal for many pipe types.

Battery 12 V, 2,0 Ah for many pressingsWith use of charger with impulse-tchnology No memory effect

Buis snijder ridgid p-tec 5000

Proven technology, high-grade material and precise machining of die head, dies and cover form a unit and ensure an excellent start-cutting performance and easy threading. No stalling of dies. Long, precise pipe guidance for perfect pipe centering. The chip holes which become wider at the outside enable good chip flow and clean threads. Pipe threads R tapered, right-hand ISO 7-1, EN 10226 (DIN 2999, BSPT)

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

Robust quality tool for removing outer and inner burr from pipes.Stainless steel pipes, other steel pipes, copper, brass, aluminium, steel, plastic pipes Ø 8–35 mm, Ø 3/8–1 3/8.

High performance cropping tongs in forged and specially hardened steel for cutting threaded rods.Steel, stainless steel up to strength class 4.8 (400 N/mm2) M 6 – M 10, UNC 3/8.REMS cropping tongs Mini – cuts threaded rod in just 2 seconds.Made of forged and specially hardened steel.Reversible cropping inserts for double service life.Cropping inserts with high precision thread contour machined on CNC production centres for exact guiding of the threaded rod in the cutting process. Plier parts, cropping inserts and specially machined and hardened cutting edges, made to fit exactly, for cutting without burr.Cutting device in pliers design (Patent EP 1 459 825, Patent US 7,284,330). Very compact design and low weight of the REMS Mini cropping tongs due to special arrangement of the cropping tongs connection (Patent EP 2 347 862).

Cutter, 151 tubing

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

Robust quality tool for removing outer and inner burr from pipes. Stainless steel pipes, other steel pipes, copper, brass, aluminium, steel, plastic pipes Ø 10–54 mm, Ø 1/2–2 1/8.REMS REG 10-54 – the multiple edge up to Ø 54 mm

REMS Swing set. One-handed pipe bender Ø 10–32 mm, Ø 3/8"-7/8", up to 90°. Soft copper tubes Ø 10–22 mm, Ø 3/8–7/8", s=1mm, soft plastic coated copper tubes Ø 10–18 mm, Ø 3/8"–5/8", s = 1mm, plastic coated C-steel pipe for press fitting system Ø 12–18 mm, mild precision steel pipe Ø 10–18 mm, s=1mm, plastic pipe with metallic insert Ø 14–32 mm. Up to Ø 26 mm with bends, bend segments, universal stop with sliding pieces, in stable steel case/ case. Up to Ø 32 mm with bends, bend segments, 2 stops with sliding pieces, in stable case.

High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.

Ridgid rp-219 jaw 19 kn u20

Handy quality tools for clean, fast pipe cuts. For thin-walled pipes also. Sturdy aluminium design. For single-hand operation.Plastic pipes, multi-layer composite tubes Ø 42 mm Ø 158

Boor, 127 binnen/buiten

KNIPEX 87 41 250 Verstelbare moerentang met anti-slip kunststof bekleed grijs geatramenteerd 250 mm

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

Cutter, 152 buizen

KNIPEX 87 05 300 Cobra® Hightech-waterpomptang met meer-componentengrepen grijs geatramenteerd 300 mm

High compression pressing tongs/pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing tongs/pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC & REMS Mini-Press 22V ACC drive units. Read and follow the installation and assembly instructions of the system provider/manufacturer.

REMS cutter wheel St for steel pipes, cast iron pipes (SML)

Height-adjustable material support with ball guide for rotating and stationary pipe and rod material. For crafts and industry. For construction sites and workshops. Pipe Ø (1/8) 1 – 6", Ø (6) 25 – 150 mm. Rod material Ø (6) 25 – 150 mm REMS Herkules – the strong support.