Rems Gereedschap voor loodgieterswerk - pagina 4

Robust quality tools for cutting tubes. Particularly suited for cutting stainless steel tubes.Copper tubes, thin-walled stainless steel tubes, thin-walled steel, aluminium, brass tubes Ø 6 – 35 mm Ø 18 – 138REMS RAS Cu-INOX – the compact version with telescopic spindle.

Hand pressure test pump with manometer, p = 60 bar/6 MPa/870 psi, for pressure and tightness testing of pipe systems and containers up to 60 bar/6 MPa/870 psi. Corrosion-resistant, powder-coated steel container for 12 l volume. 1.5 m high-pressure hose with 12" connection. In carton.

Proven technology, high-grade material and precise machining of die head, dies and cover form a unit and ensure an excellent start-cutting performance and easy threading. No stalling of dies. Long, precise pipe guidance for perfect pipe centering. The chip holes which become wider at the outside enable good chip flow and clean threads. Pipe threads R tapered, right-hand ISO 7-1, EN 10226 (DIN 2999, BSPT)

Mobile, handy inspection camera for affordable inspection and damage analysis of hard-to-reach places such as cavities, shafts, pipes etc. For battery operation.
Documentation of images and videos on MicroSD card. For battery or mains operation.
Camera head Ø 8mm

REMS CamScope HD – sharp images and videos from cavities, shafts and pipes in HD quality (1920  ×  1080 pixels).
MicroSD card holder.

Construction
Super light and handy.
Controller unit with pistol grip and camera cable set, only 0.5 kg. Can be used anywhere, freehand, above head height, even in particularly tight spaces.
Stable, impact-resistant plastic housing with ergonomically designed pistol grip.
The buttons are located directly below the display, making it possible to hold the pistol grip and operate the buttons with one hand.
Buttons for e.g. adjustment of the brightness of the LEDs in the camera head and the display in every 4 steps, mirroring and zooming of the image shown in the display, retrieval and navigation in the menu.
Integrated power LED in the On button for displaying the operating mode.
Li-ion battery 3.7 V with 4.0 Ah for long operating time. Different camera-cable sets HD can be inserted.
Plug-screw connections for replacing camera-cable sets without the use of tools.
Stable case for controller unit with pistol grip, camera-cable set Color 8-1 HD, USB cable and accessories.

Controller unit with TFT-LCD color display
Controller unit with pistol grip with 5" color display with the latest TFT-LCD technology and 480×854 pixels, for the sharpest images and videos.
Possibility of choosing a menu language.
MicroSD card holder.
Images and videos in HD quality can be saved on MicroSD cards for easy documentation of the inspection results. 4x digital zoom. The date and time of the recording can be saved on the image and video if desired.
Instant playback of saved recordings or transfer to other devices per MicroSD card.
USB connection only for direct connection with PC or laptop and for charging the battery.

Battery and mains operation
Li-Ion Technology. Pistol grip controller unit with integrated rechargeable li-ion battery 3.7V, 4.0 Ah. Easy and efficient.
High energy density to approx. 5 hours of continuous operation. During the charging of the battery with the USB cable, the machine can be used via mains operation. No memory effect for maximum battery power.

Interchangeable camera cable set Color
Camera-cable set Color, consisting of color camera Ø 8 mm, with CMOS sensor, with dimmable LEDs with white light for optimal brightness setting and Fixed-Focus function for automatic adjustment of image sharpness, protected against temporary immersion in water ( IP 67).
Camera cable set Color 8-1 HD with 1 m flexible push cable and mirror, hook or magnet for attachment.

Adapter tongs Z8for driving REMS pressing rings S & 45° (PR-2B)

REMS pressing ringsHigh compression pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing segments manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

REMS pressing ringsHigh compression pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing segments manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

REMS Swing set. One-handed pipe bender Ø 10–32 mm, Ø 3/8"-7/8", up to 90°. Soft copper tubes Ø 10–22 mm, Ø 3/8–7/8", s=1mm, soft plastic coated copper tubes Ø 10–18 mm, Ø 3/8"–5/8", s = 1mm, plastic coated C-steel pipe for press fitting system Ø 12–18 mm, mild precision steel pipe Ø 10–18 mm, s=1mm, plastic pipe with metallic insert Ø 14–32 mm. Up to Ø 26 mm with bends, bend segments, universal stop with sliding pieces, in stable steel case/ case. Up to Ø 32 mm with bends, bend segments, 2 stops with sliding pieces, in stable case.