Elektrische auto oplader - pagina 5

The Charge Amps Aura is OCPP-compatible and can be connected to preferred cloud service. This charging station allows you to charge two vehicles simultaneously with up to 22 kW per socket. Swedish industrial design that adds aesthetic value to your property.

Please note that the charging box must be installed and removed by an authorized installer, otherwise the warranty will be void.

(5555935001) 20 A, 3 phases, for charging hybrid and electric cars with Type 2 connection.

LAPP HELIX Type 2 charging cables connect your EV to the charging station, charging pole or wallbox - for easy charging at home or on the road. Simply connect the coupling of the cable to the car and the plug to the power source. The charging process is automatically started and finished by the on-board electronics. LAPP charging cables are suitable for plug-in hybrid (PHEV) and battery electric vehicles (BEV).

Stroomverlengkabel, IEC 62196 Type 2 male naar IEC 62196 Type 2 female, 10 m, zwart, driefase

(5555934032) 32 A, 3 phases, for charging hybrid and electric cars with Type 2 connection.

LAPP Type 2 standard charging cables connect your EV to the charging station, charging pole or wallbox - for easy charging at home or on the road. Simply connect the coupling of the cable to the car and the plug to the power source. The charging process is automatically started and finished by the on-board electronics. LAPP charging cables are suitable for plug-in hybrid (PHEV) and battery electric vehicles (BEV).

EV-lader dé 22kW Wallbox met 15m Kabel (APP VERSION) levert tot 22 kW 3-fase laden met een Type 2-kabel, Tuya Smart-appbediening, RFID-toegang en een LCD-statusdisplay.

Deze wallbox wordt aangesloten op een rode 32 A 3-fase CEE-contactdoos en ondersteunt een selecteerbare laadstroom voor flexibel dagelijks EV-laden.

• Tot 22 kW bij 400 V, 32 A, 3-fase
• 15 m Type 2-laadkabel
• Selecteerbare stroom van 6 A tot 32 A
• Tuya Smart-app met schema’s, stroomaanpassing en laadregistraties
• RFID-toegang met drie meegeleverde RFID-kaarten
• IP54 wallbox en IP55 Type 2-connector

Met appbediening, laadvertraging, display-informatie en geïntegreerde beveiligingssystemen ondersteunt het comfortabel en gecontroleerd EV-laden.

The Besen SQ20-7KW-APP wall charger is ideal for home and professional use. With Bluetooth app connectivity, you can set charging time and current, start or stop charging, and review session history. A 3.5-inch color LCD displays voltage, current, temperature, and power consumption in real time. Supports SAE J1772, IEC 62196-2, and GB/T interfaces, with 32 A max current and IP66 protection.

Please note that the charging box must be installed and removed by an authorized installer, otherwise the warranty will be void.

The eLOAD Model T is a very easy-to-use charger that opens and closes your Tesla's charging port with the push of a button for convenient connection and disconnection. You can adjust the charging from your car's controls.

(5555934006) 32 A, 1 phase, for charging hybrid and electric cars with Type 2 connection

LAPP Type 2 standard charging cables connect your EV to the charging station, charging pole or wallbox - for easy charging at home or on the road. Simply connect the coupling of the cable to the car and the plug to the power source. The charging process is automatically started and finished by the on-board electronics. LAPP charging cables are suitable for plug-in hybrid (PHEV) and battery electric vehicles (BEV).

Discover Amina S 20A – the smart, compact and powerful charging box with up to 13.8 kW charging power, perfect for both regular and smart homes. With Amina Powerlink, you can have full control over your car’s energy consumption and charge when electricity prices are lowest, all via a simple app. Seamlessly integrate with ZigBee and Bluetooth for optimal local connectivity and enjoy an elegant design with a 6-meter fixed cable and advanced load balancing.

Please note that the charging box must be installed and removed by an authorized installer, otherwise the warranty will be void.

Three-phase smart/intelligent charger for electric cars, motorcycles and bicycles or plug-in hybrid.

Attractive design, simple use and easy installation in both private homes, housing complexes, offices, shopping centers, hospitals, companies, etc.

Charging modulator that takes into account the home's consumption and adjusts the power requirement to achieve the highest recharge in the shortest possible time without exceeding the maximum current that the home has available.

Transformer measurement of the home's total consumption (transformer is included).

Limiting the maximum current through the selector on the device or via the App.

With 5 meter charging cable. Charging Mode 3 with plug Type 2 according to EN 62196.

Built-in DC filter – (RDC-DD) – Therefore only protected with Combi/Aut, 16-32A, Type A.

Wi-Fi communication / Ethernet

From the mobile phone with the VIARIS APP, we can see the status, download an Excel file with the consumption history of the charger and the installation and a list of users.

Remote firmware update

Notifications for App.

OCPP Communication Protocol 1.6.

Programming of charging time via App.

LED signaling of VIARIS UNI and vehicle status.

Touch or RFID activation.

Input for external control (payment system, locking system, etc.)

Output for control of ventilation

IK10 PC cabinet with high impact strength and high deformation temperature.

Degree of tightness IP54.

Please note that the charging box must be installed and removed by an authorized installer, otherwise the warranty will be void.

Laad je elektrische auto snel en efficiënt op met de draagbare Blaupunkt P3P10MT2 3-fase oplader. Deze 11KW oplader levert een indrukwekkend laadvermogen via een 400V stopcontact, waardoor je maximale vrijheid hebt om je auto op te laden, waar je ook bent. Met de flexibele oplader kun je de ampère aanpassen van 8A tot 16A, wat betekent dat je de beste laadsnelheid kunt krijgen afhankelijk van wat het beschikbare stopcontact kan leveren.Met een Type 2 stekker, die sinds 2019 de standaard is in de EU, past deze oplader op alle elektrische auto’s met dezelfde aansluiting. Hij is waterdicht (IP65/54) en beschermd tegen zowel water als stof, zodat je hem in alle weersomstandigheden kunt gebruiken. De ingebouwde RCD-sensor en bescherming tegen lekstroom zorgen ervoor dat het opladen veilig en betrouwbaar is. Met een totale lengte van 6 meter krijg je maximale flexibiliteit, en het compacte ontwerp maakt het eenvoudig om de oplader op te bergen en te vervoeren.3-fase 11KW opladerIngebouwde RCD-sensor en bescherming tegen lekstroomWaterdicht en stofdicht (IP65/54)Verstelbare ampère (8-16A)6 meter kabel voor flexibiliteit

(5555925000) up to 2.3 kW, 10 A, 1 phase, for mobile charging of hybrid and electric cars with Type 2 connection.

The LAPP Mobility Dock is a handy solution for supplying electric vehicles with power even without a charging station, charging pole or wallbox. As an emergency charger, it is the perfect companion on the road to charge plug-in hybrids (PHEV) and battery electric vehicles (BEV).

Anker SOLIX V1 11kW Socket Version combineert app-gestuurd EV-laden, bediening met swipe, opties voor zonne- en dalurenladen en een ruimtebesparend ontwerp van 13.5 cm breed.

Het ondersteunt enkel- en driefasig laden voor 99.9% van PHEV's en BEV's, met bediening via WiFi, Bluetooth of de Anker-app, inclusief gezinsdeling voor maximaal 10 gebruikers.

• IntelliGesture-aanraakbediening om te starten, te stoppen of over te schakelen naar laden op vol vermogen
• Installatieontwerp van 15 minuten met bekabeling van boven, onder of achter
• IP65-kabelversie met IK10-slagvastheid en werking van -30°C tot 50°C
• Ingebouwde temperatuursensoren en lekbeveiliging
• Geïntegreerde energiemeter met ±1% meetnauwkeurigheid
• RFID-kaart en draaibare houder voor het laadpistool inbegrepen

Met slim energiebeheer en eenvoudige dagelijkse bediening helpt Anker SOLIX V1 thuis EV-laden flexibeler en gemakkelijker te maken.

(5555935015) 32 A, 3 phases, for charging hybrid and electric cars with Type 2 connection.

LAPP HELIX Type 2 charging cables connect your EV to the charging station, charging pole or wallbox - for easy charging at home or on the road. Simply connect the coupling of the cable to the car and the plug to the power source. The charging process is automatically started and finished by the on-board electronics. LAPP charging cables are suitable for plug-in hybrid (PHEV) and battery electric vehicles (BEV).

NexBlue Zen (current sensor) is a delicate device that monitors energy and optimizes energy consumption, supports dynamic load balancing and solar surplus charging. It is perfect for non-smart meter scenarios and can communicate with NexBlue chargers via Wi-Fi, LAN or Nexus RF locally. It can handle up to 1500A.*

Product includes:

• 1 pc NexBlue Zen (current sensor)
• 1 pc C10 1P MCB
• 1 pc 3-in-1 CT clamps for dynamic load balancing
• 1 pc antenna

* Note: In some cases, other types of CT clamps may be required. Contact Skårebo for further information.

EV-oplaadstation, 22 kW, 32 A (IEC 62196 Type 2), zwart

Wandlader voor elektrische auto’s Besen BS20 levert tot 7.2 kW enkelfasig of 22 kW driefasig laden met app-bediening en ingebouwde veiligheidsfuncties.

Ontworpen voor flexibel gebruik van particuliere garages tot grote commerciële parkeerterreinen: deze geavanceerde EV-lader ondersteunt snel, efficiënt laden voor een breed scala aan voertuigtypen, waaronder personenauto’s, elektrische schoolbussen en ambulances. Met een speciale app kun je de werking van BS20 beheren voor handig dagelijks gebruik.

• Tot 7.2 kW uitgang in enkelfasige modus
• Tot 22 kW uitgang in driefasige modus
• App-gestuurde werking via speciale app
• Ontworpen voor zowel thuis- als commerciële installaties
• Meerdere veiligheidsfuncties voor comfortabel en veilig gebruik

Betrouwbare laadprestaties en slimme bediening in één doordacht ontworpen EV-wandlader.

EV-oplaadstation, 3.5 kW, 16 A (IEC 62196 Type 2)

(5555911001) for storing a charging cable for hybrid and electric vehicles

(5555934002) 32 A, 1 phase, for charging hybrid and electric cars with Type 2 connection.

LAPP Type 2 standard charging cables connect your EV to the charging station, charging pole or wallbox - for easy charging at home or on the road. Simply connect the coupling of the cable to the car and the plug to the power source. The charging process is automatically started and finished by the on-board electronics. LAPP charging cables are suitable for plug-in hybrid (PHEV) and battery electric vehicles (BEV).

32 A, 3 phases, for charging hybrid and electric cars with Type 2 connection.

LAPP Type 2 standard charging cables connect your EV to the charging station, charging pole or wallbox - for easy charging at home or on the road. Simply connect the coupling of the cable to the car and the plug to the power source. The charging process is automatically started and finished by the on-board electronics. LAPP charging cables are suitable for plug-in hybrid (PHEV) and battery electric vehicles (BEV).

(5555934027) 32 A, 3 phases, for charging hybrid and electric cars with Type 2 connection.

LAPP Type 2 standard charging cables connect your EV to the charging station, charging pole or wallbox - for easy charging at home or on the road. Simply connect the coupling of the cable to the car and the plug to the power source. The charging process is automatically started and finished by the on-board electronics. LAPP charging cables are suitable for plug-in hybrid (PHEV) and battery electric vehicles (BEV).

(5555923002) 32 A, adapter cable for the LAPP charging station Universal

The mains adapter directly connects the LAPP Universal charging station for EVs to a CEE socket - for easy charging at home or on the road. Simply connect the Type 2 coupling of the cable to the car and the CEE plug to the socket. The on-board electronics automatically starts and finishes the charging process.
The LAPP charging station is suitable for plug-in hybrid (PHEV) and battery electric vehicles (BEV).

Convenient stand for charger and cables. Fits all eLOAD portable chargers. Easy to mount on the wall. Protects charger and cables. Durable and practical product.