Einhell - pagina 4

Lawn Trimmer Accessory, Spare Blade-set PXC Trimmer

Einhell TE-VC 18/10 Li-Solo 10 l Zwart, Rood

Einhell GE-CM 18/33 Li (1x4,0Ah) Duwgrasmaaier Batterij/Accu Zwart, Rood

The Einhell TC-PW 610 pneumatic impact wrench delivers plenty of power for tasks around the home, workshop and garage. It is also ideal for challenging tasks thanks to its high power output. The robust nutrunner has a maximum torque of 610 Nm. And the non-slip, rubber-coated handle ensures that it is safe and comfortable to work with, regardless of the task. With one step in the anti-clockwise direction and three steps in the clockwise direction, the pneumatic impact wrench can be used for a wide range of DIY tasks.

Optimal power is achieved with a hose with an internal diameter of 9 millimeters or more. The maximum working pressure is 6.3 bar. The product is supplied complete with 10 sockets in the sizes 8/10/11/13/17/19/21/22/24/27 millimeters and 1 small oil bottle and 1 nipple, which also includes a 125 mm extension.

Max. unscrewing torque: 610 Nm
Operating pressure max.: 6.3 bar
Speed, no load: 7000 min^-1
Air consumption: 198 L/min

Einhell PRESSITO 18/21 luchtcompressor 21 l/min Batterij/Accu

Our impact drill is a high-performance, compact, high-quality tool that meets the demands of experts for drilling and impact drilling tasks everywhere in the home, workshop and garage. Its high-quality drill chuck made of metal with guide ring, locking function and "Press & Lock" spindle lock enables user-friendly tool changes.

With the integrated electronic controls, the speed can be pre-selected and precisely adjusted. A robust, adjustable metal drilling depth stop enables accurate, repeatable drilling depths. The reverse function means that screwdriving tasks can also be carried out. For user-friendly and safe operation of the machine, there is a main handle with soft grip and an additional handle with soft grip and an anti-twist lock.

A drill bit depot in the additional handle keeps a supply of different bit sizes ready to use at all times. Perfect tidiness is restored with a twist of the hand using a cable clip for securing the unwound cable.

Power supply: 230-240 V | 50 Hz
Power: 650 watts
Number of gears: 1
Speed ​​(gear 1): 0-3,000 rpm
Impact frequency (gear 1): 0-48,000/min
Chuck: 1.5-13 mm "Press & lock" spindle lock
Drilling capacity in wood: 25 mm
Drilling capacity in metal: 10 mm
Drilling capacity in concrete: 13 mm

Snoerloze radiale verstekzaag biedt 18V Power X-Change flexibiliteit met een Ø210 mm hardmetalen precisiezaagblad, laserlijnmarkering en LED-werklamp voor nauwkeurige zaagsneden thuis en in de werkplaats.

Einhell TE-MS 18/210 cordless mitre saw is gebouwd voor handig snoerloos gebruik met een draaggreep, een draaibare tafel met nauwkeurige hoekinstellingen voor versteksneden en een kantelbare zaagkop voor schuine sneden, plus stofzak en stofafzuiging om de werkplek schoon te houden.

• Power X-Change familie: gebruikt 1 x 18V accu (1.5 Ah of hoger aanbevolen)
• Onbelast toerental: 3.000 tpm
• Verstekbereik: 47° tot 47°
• Kantelhoekbereik: 45° tot 0°
• X-Tend steunrails verstelbaar zonder gereedschap
• Geïntegreerde lengtestop voor herhaalbare sneden
• Inclusief werkstukklem, laser en LED-werklamp

Ontworpen om nauwkeurige, herhaalbare afkort-, verstek- en schuine sneden eenvoudiger te maken waar je ook werkt—zonder kabel die in de weg zit.

De Einhell TC-PC 45 pneumatische beitelhamer is een krachtige en hoogpresterende assistent voor het bewerken van steen- of metaalmaterialen bij sloop- en renovatiewerkzaamheden binnen en buiten het huis.

De machine is uitgerust met een antislip, rubberen handgreep met een gebruiksvriendelijk en veilig ontwerp. De machine heeft een maximale werkdruk van 6.3 bar en levert een slagfrequentie tot 4500 min^-1 met een slagkracht tot 1.2 joule.

De beitel wordt stevig vastgehouden door de zeskantopname. Optimale prestaties worden bereikt met een slang met een binnendiameter van 9 millimeter of meer. Dankzij de veelzijdigheid zijn er praktisch geen grenzen aan de mogelijke toepassingen van het gereedschap.

Bij de levering inbegrepen zijn een 120 mm beitelset met 4 delen, 1 klein olieflesje, 1 nippel en 1 spanveer.

Max. werkdruk: 6.3 bar
Luchtverbruik: 1

Einhell CE-AP 18 Li-Solo elektrische luchtpomp 0,053 bar 670 l/min

The polisher/sander is a powerful, robust and handy device that is perfect for polishing and sanding painted surfaces as well as sanding wood, plastic and metal.

Thanks to the soft grip, this machine can be handled safely at all times, and tasks such as polishing cars can be carried out quickly and thoroughly.

The extensive accessories consist of 1 foam pad, 2 synthetic polishing caps and sanding paper in grits 60, 80 and 120 with 2 of each.

Power supply: 230 Volt | 50 Hz
Power: 1100 Watt
Speed: 1,000-3,500 rpm.
Product weight: 2.29 kg.
Sanding pad diameter: 180 mm.
Sanding disc diameter: 180 mm.
1 pc. foam disc.
2 pcs. polishing discs in plastic.
2 pcs. sandpaper grit 60.
2 pcs. sandpaper grit 80.
2 pcs. sandpaper grit 120.

This pendulum jigsaw is a powerful model for ambitious sawing tasks on any material. Individual sawing of the material is possible thanks to the adjustable pendulum stroke with 4 settings and the blade speed control electronics.

Tool-free blade change saves valuable time and the ergonomic soft grip makes the TC-JS 85 very comfortable to hold in the hand. A robust sole with removable cover to protect the workpieces promotes stable guidance and can also be rotated to enable mitre cuts up to 45 °. An effective chip guard ensures excellent surface quality.

Dust extraction via the adapter and a selectable dust blowing function allow you to work cleanly, while the additional saw blade for wood allows you to start your project immediately. The parallel stop makes it easier to control and ensures precise sawing.

Power supply: 230 Volt | 50 Hz
Power: 620 Watt
Number of strokes: 800-3,000/min
Stroke length: 20 mm
Cutting depth in wood: 85 mm
Cutting depth in plastic: 12 mm
Cutting depth in steel: 8 mm
Max. bevel: 45 °
Included: Saw blade for wood

Scarifier Accessory, Aerating roll. GC-ES/SA 1231/1

Our pneumatic impact wrench/nut wrench delivers plenty of power for tasks around the home, workshop and garage. The robust impact wrench has a maximum torque of 340 Nm. and is equipped with non-slip, rubber-coated handles, which ensure that it is safe and comfortable to work with regardless of the task

The machine has a one-step left-hand rotation and 3-step right-hand rotation, which means that the impact wrench is used for a wide range of tasks. The impact wrench reaches its peak performance using a hose with an internal diameter of 9 millimeters or more. The machine has a maximum working pressure of 6.3 bar. The product is supplied complete with 8 sockets in standard sizes 8/10/11/13/17/19/21/22 millimeters and 1 small oil bottle and 1 nipple.

Max. unscrewing torque: 340 Nm
Operating pressure max.: 6.3 bar
Speed, no load 7500 min^-1
Air consumption: 198 L/min

The Einhell TC-PC 45 pneumatic chisel hammer is a powerful and high-performance assistant for working with stone or metal materials on demolition and renovation tasks in and outside the home.

The machine is equipped with a non-slip rubberized handle with a user-friendly and safe design. The machine has a maximum operating pressure of 6.3 bar and delivers an impact frequency of up to 4500 min^-1 for an impact force of up to 1.2 joules.

The chisel is securely held by the hexagonal chuck. Optimal performance is achieved using a hose with an inner diameter of 9 millimeters or more. Thanks to its versatility, there is practically no end to the potential applications of the tool.

The scope of delivery includes a 120 mm chisel set with 4 parts, incl. accessories so that the chisel hammer can also be used as a needle hammer, 1 small oil bottle, 1 nipple and 1 tension spring.

Max. operating pressure: 6.3 bar
Air consumption: 113 l/min
Impact frequency: 4,500 /min
Stroke length: 43 mm
Impact force: 1.2 J
Impact force: 1.2 J

Einhell TE-AC 36/6/8 Li OF Set-Solo luchtcompressor 130 l/min Batterij/Accu

Einhell TE-BD 550 E kolomboormachine 450 W

Einhell 2351266 stofzuiger accessoire Handstofzuiger Filter

Einhell TC-BD 450 kolomboormachine Sleutel 450 W

Leaf blower, 100 W, no battery, 36 V (requires 2 pcs. of 18V battery), compatible with 4511340, 4511395, 4511341, 4511396 & 4511357

Lid van de Power X-Change familie
Multifunctioneel: Reiniging van steen, hout, kunstgras & meer

Einhell TE-CD 18/50 Li-i BL 1800 RPM 2,35 kg Zwart, Rood

The Einhell hot air gun produces the right temperature, whether for removing old varnish and paint, for installing plastic pipes or for heating metal for soldering tasks. With an output of 2000 W, this hot air gun is a proven helper during various work steps that require heat, be it 50 or as much as 550 degrees.

A large adjustment wheel lets you set the temperature to nine different levels, while a three-position switch controls the required air flow from 250 to 500 liters per minute. An extra cold setting ensures quick cooling of hot metal parts for changing the nozzle.

Possibility of safe placement during stationary use. A reduction nozzle, a wide-jet nozzle, a reflector nozzle and a window nozzle are all supplied as standard accessories for maximum versatility for all tasks.

Technical data:
Power supply: 220-240 Volt | 50 Hz
Power: 2,000 Watt
Temperature at setting 1: 50 °C
Temperature at setting 2: 50-550 °C
Temperature at setting 3: 50-550 °C
Air flow at setting 1: 250 l/min
Air flow at setting 2: 250 l/min
Air flow at setting 3: 500 l/min

Accessories included:
Reduction nozzle
Wide nozzle
Reflector nozzle
Heating nozzle

Selector switch for vacuum/blowing functionLarge 2-piece suction tubeElectronic speed controlUseful additional handle2 guide rollers40l debris bag with looking windowAdjustable carrying strapMains supply: 230-240 V | 50 HzPower: 3,000 WIdle speed: 7,000 - 13,500 min^-1Blow velocity: 240 km/hMax. suction power: 650 m³/hShredding function: 10:1Capacity of catch bag: 40 L

Einhell 4510070 schroefboormachine & slagmoersleutel 2100 RPM Zwart, Rood

OREGON high-quality rail and chainTool-free chain tensioning and changingMetal gear for long lifeErgonomic handle with softgripSturdy stop claws made of metalOil tank for automatic chain lubricationKickback protection with with mechanical instant chain brakeBig filler opening with quick fastenerAutomatic chain greasingChain catch boltMains supply: 220-240 V | 50 HzPower: 1,900 WIdle speed: 7,100 min^-1Sword length: 350 mmCutting length: 32.5 cmCutting speed: 15.5 m/sCapacity of oil tank: 160 mL