CPU koeler - pagina 22

Thermal Grizzly Intel 1851 Mycro Direct-Die Pro RG

Water cooler optimized for Intel LGA1851 direct-die mounting with a nickel-plated copper microfin cold plate, low-flow-resistance jet channels and integrated RGB lighting.

The Intel 1851 Mycro Direct-Die Pro RGB V1 is designed to sit directly on a delidded Intel CPU to send heat straight into the water loop, with an acrylic-and-aluminum cover and controllable ARGB illumination.

• Direct-die installation for LGA1851 CPUs — requires removal of the ILM and CPU heatspreader; delidding is at your own risk


• Nickel-plated copper cold plate with microfins and a jet system, engineered for low flow resistance


• Acrylic layer tempered after milling to prevent stress cracks beneath the anodized aluminum lid


• Digital aRGB LEDs under the lid, controllable via a 3-pin ARGB header (+5V/DATA/GND); LEDs also illuminate the G1/4 fittings


• G1/4-inch female threading for standard fittings


• Tested with KryoSheet and thermal pads — additional pad thickness affected contact pressure and showed no significant temperature improvements

Built for users who want a compact direct cooling path from the CPU die into a water loop while retaining customizable RGB lighting.

Noctua chromax.black NM-AM5/4-MP78 - processor cooler mounting kit - CPU Bevestigingsbeugels

Joy-It ARMOR CASE "BLOCK ACTIVE"

SilverStone SST-XE04-SP5B - AMD SP5 - CPU luchtkoeler

Enermax ETS-T60D - CPU luchtkoeler - Maximaal 25 dBA

Arctic Freezer 8A CO - CPU luchtkoeler

Darkflash Computer Radiator DN-D240 BLACK - CPU waterkoeling

Darkflash Computer Radiator DN-D240 WHITE - CPU waterkoeling

Tryx PANORAMA 240mm - ARGB Black - CPU waterkoeling

Tryx PANORAMA 240mm - CPU waterkoeling

DeepCool LP360 - Black - CPU waterkoeling - Max 39 dBA

Thermal Grizzly Intel 1851 Delid-Die-Mate Heater

The Intel 1851 Delid-Die-Mate Heater V1 is a specially designed heating element for the Intel 1851 Delid-Die-Mate V1. The heater raises the temperature of both the CPU and the delidder to 165°C, the necessary temperature for delidding. The operation is controlled via a control unit with an OLED display, which is connected to the heater with two cables. A laptop/smartphone charger with at least 65 watts of power and a USB Type-C connector, which is not included, is required for the heater to operate. A small amount of thermal paste is also needed.

Heating element for warming the CPU
Designed for the Intel 1851 Delid-Die-Mate V1
Follow the warning instructions!
Scope of Delivery:

1x Intel 1851 Delid-Die-Mate Heater V1
1x Angle wrench
1x TG Cleaning Wipes
1x Kryonaut, 1g
Warning Instructions:

Note: When delidding with the Intel 1851 Delid-Die-Mate V1, the CPU should be heated to 165°C (the melting point of indium is 157°C) to liquefy the indium, making it easier to remove the heat spreader. This minimizes mechanical stress on the chip and helps prevent damage. Otherwise, there is a high risk that the CPU could be damaged during delidding.

Caution: delidding a CPU can be dangerous. Any damaged caused by this will not be covered by warranty. Make sure to ressearch how to before trying. 

Dynatron Q5 - LGA 1851/1700 - CPU luchtkoeler

The Dynatron Q5 is an active CPU cooler designed for Intel Alder Lake-S processors with an LGA 1700 and 1851 socket. It is ideal for 2U servers and supports a maximum thermal design power (TDP) of up to 125 watts.

The cooler features a copper base with aluminum fins and embedded heat pipes, ensuring efficient heat dissipation. With dimensions of 90.7 x 85.0 x 65.1 mm and a weight of 515.2 grams, it is compact yet powerful. It is equipped with a 60 x 60 x 25 mm fan with dual ball bearings and PWM functionality for precise speed control. The fan speed can be adjusted from 1,600 RPM under low load to 8,000 RPM at maximum load, delivering an airflow of up to 46.41 CFM.

Noise levels range from 18 dBA at low speed to 52.94 dBA at maximum speed. The cooler has an expected lifespan of 70,000 hours under continuous operation at 40°C. To ensure optimal heat transfer, the Dynatron Q5 comes with pre-applied Shin-Etsu 7762 thermal paste.

Its compact design and high cooling efficiency make it suitable for high-performance systems where space is limited and reliable heat management is crucial.

Darkflash UV360 CPU Cooler

be quiet! PURE ROCK 3 LX - CPU luchtkoeler - Max 31 dBA

Arctic Liquid Freezer III Pro 240 A-RGB - CPU waterkoeling

Tryx PANORAMA 240mm - Black - CPU waterkoeling

Supermicro Koelere server SUPERMICRO SNK-P0078P (4189) 2U doorgeven - CPU koelelement (zonder fan)

Alpenföhn Zwart Ridge - CPU luchtkoeler

Thermal Grizzly AM5 Short Backplate Black - CPU Bevestigingsbeugels

Tryx STAGE ARGB 360 WHITE - CPU waterkoeling - Maximaal 25 dBA

Sudokoo NEXAURA 360

CPU-waterkoeler met een 360mm aluminium radiator, drie PWM-ventilatoren, instelbare PWM-pomp en gesynchroniseerde ARGB diamond-glow-verlichting.

Sudokoo NEXAURA 360 combineert een precisie-ontworpen cold plate en een 2500–3400 RPM pomp met stille akoestiek, terwijl drie PBT PWM-ventilatoren sterke luchtstroom en druk leveren met soepele FOC closed-loop-motorregeling voor stabiele koelprestaties.

• ARGB “diamond glow” lichteffect met volledige dekking op de pompkap
• Drie 120mm PWM-ventilatoren met 0 RPM-modus bij <5% PWM en Fluid Dynamic Bearing
• Ventilatorprestaties: 55.27 CFM luchtstroom, 2.69 mmAq luchtdruk, ≤27.76 dB(A)
• ARGB-bediening en synchronisatie via compatibele moederborden/controllers (3-pin +5V-D-G)
• Montagebeugels inbegrepen voor Intel LGA1851/1700/1200/1151/1150/1155 en AMD AM5/AM4

Strakke looks, aanpasbare verlichting en verfijnde akoestiek maken het een ideale AIO-koeler voor moderne Intel- en AMD-builds.

Thermalright SI-100 - White ARGB - CPU luchtkoeler - Max 28 dBA

Montech NX400 - White - CPU luchtkoeler - Max 35 dBA

Thermalright Grand Vision 360 Argb Black - CPU waterkoeling - Maximaal 30 dBA