Bosch - pagina 92 - Kwaliteit tegen concurrerende prijzen

Bosch HSS PointTeQ drill bit set - for metal - 5 pieces (pack of 5)

Boorstiftset, voor metaal, spiraalboor, 5 stuks, 5 mm, 6 mm, 4 mm, 3 mm, 2 mm, zeskant, lengte: 60 mm, 72 mm, 82 mm, 98 mm, 91 mm (pak van 5)

10,50 € (8,68 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR PLUS 7X 16X1000MM

Boorstift, voor beton, metselwerk, versterkt beton, graniet, gneis, hamerboor, 16 mm, SDS-plus, lengte: 1000 mm

91,69 € (75,78 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch DIAMANTSKIVE 115MM BEST BETON

Best for Concrete diamond cutting disc provides fast cuts in concrete. Its laser-welded diamond cutting segments with a height of 15 mm are sturdy for quick cuts. It has speed stripes integrated into the diamond segment, minimizing side friction, allowing work at high speeds. Additionally, the optimized diamond program provides the fastest cuts. Use this disc for cutting all kinds of concrete

50,30 € (41,57 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch DYBDESTOP BASIS TIL GOP

Depth stop Basic provides precise cutting depth in combination with segment saw blades (e.g. when replacing individual parquet elements). It has a 4-step adjustment for precise indication of the limits of the cutting depth. Designed for use on all materials. Cutting depths for segment saw blades with a diameter of 85 mm: Cutting depths of 8, 10, 12 and 14 mm for segment saw blades with a diameter of 100 mm: 14,16,18,20 mm This depth stop is suitable for use with all Starlock-, Starlock Plus- and Starlock Max-tools as well as common multi-tools from Bosch.
Depth stop Basic
Four-step setting
For precise cutting depths together with segment saw blades Ø85mm and Ø100mm (e.g. when replacing individual parquet elements)
Cutting depths for segment saw blades Ø85mm:8,10,12,14mm
Cutting depths for segment saw blades Ø100mm:13 ,15 ,17 ,19 mm

8,31 € (6,87 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch UDSKIFTNINGSBØRSTE TIL UDSUGNINGSSKÆRM

13,35 € (11,03 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch Expert voor Aluminium

Cirkelzaagblad, voor aluminium, 210 mm, 66 tanden

108,02 € (89,27 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch Expert voor Aluminium

Cirkelzaagblad, voor aluminium, 165 mm, 54 tanden

67,14 € (55,49 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch RUNDSAVKL EXP ACCU TRÆ 160X20X1.5MM 36T

Cirkelzaagblad, voor hout, 160 mm, 36 tanden

65,55 € (54,17 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch Expert HD SCM N477

Polishing fleece, voor roestvrij staal, non-ferrometaal, steel sheets, verf op hout, 115 mm, rond, korrel: extra coarse, 115 mm

4,71 € (3,89 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HULSAVSÃ†T POWERCHANGE 22-40-68MM 8 STK

Gatenzaagpakket, voor plastic, bakstenen, soft tile, stainless steel sheets, wood with metal, 9 stuks, 25 mm, 22 mm, 40 mm, 35 mm, 68 mm, 51 mm

296,86 € (245,34 €)

Extern magazijn, 5 - 6 werkdagen levertijd

Bosch BORSÃ†T Hex HARDCERAMIC 5 STK

Boorstiftset, voor beton, soft tile, hard tile, solid brick, 5 stuks, 6 mm, lengte: 100 mm, 90 mm

55,06 € (45,50 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR HSS-G DIN 340 3.2X69/106MM

The long ground HSS spiral drill bit for drilling deep holes through metal with maximum precision. Its length allows for deep drilling with this long drill head. The exposed 135-degree two-part self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the two-part tip, it is also unnecessary to mark pilot holes in advance or pilot bore up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. The long ground HSS spiral drill bit is manufactured according to DIN 340. The type N (notch angle) drill head has a 135-degree tip and a diameter tolerance of h8. This drill head is designed for drilling deep holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. It has a cylindrical shaft system (the shaft has the same diameter as the drill head) and is intended for use in drilling stands and screwdrivers
Package with one piece.

6,03 € (4,98 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BOR CYL MULTICONSTRUCTION 5.5X85MM

Boorstift, voor beton, plastic, staal, zachthout, soft tile, multimaterial, 5.5 mm, cilindrisch, lengte: 85 mm

6,88 € (5,69 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BOR CYL MULTICONSTRUCTION 16X250MM

Boorstift, voor beton, plastic, staal, zachthout, soft tile, multimaterial, 16 mm, cilindrisch, lengte: 200 mm

30,90 € (25,54 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BOOR CILINDER MULTICONSTRUCTIE 10X120MM 8 STUKS

Boorstift, voor beton, plastic, staal, zachthout, soft tile, multimaterial, 8 stuks, 10 mm, cilindrisch, lengte: 120 mm

72,52 € (59,93 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR HSS-CO s 4.2X75MM 10STK

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package of 10 pieces.

18,03 € (14,90 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch SDS-plus-5

Boorset, voor beton, metselwerk, gewapend beton, 3 stuks, 6 mm, 8 mm, 10 mm, SDS-plus aansluiting en lengte van 160 mm

20,98 € (17,34 €)

Bestelproduct, 7 - 8 werkdagen levertijd

Bosch HSS PointTeQ drill bit - for metal

Boorstift, voor metaal, spiraalboor, 3.3 mm, zeskant, lengte: 75 mm

3,16 € (2,61 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BOR CYL MULTICONSTRUCTION 6.5X100MM

Boorstift, voor beton, plastic, staal, zachthout, soft tile, multimaterial, 6.5 mm, cilindrisch, lengte: 100 mm

6,73 € (5,56 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR HSS-CO s 5X86MM 10STK

Boor, spiraalboor, 5 mm, cilindrisch, lengte: 86 mm (pak van 10)

20,55 € (16,98 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR SDS P-5 5.5X460MM

The SDS plus-5 drill head guarantees trouble-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling, so the user is not burdened. The drill is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

25,97 € (21,46 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch KUFFERT TIL GEX 125 AC/150 AC/125 TURBO

It is made of lightweight plastic. For random orbit sanders. The plastic transport case is used for safe storage and transportation of Bosch Power Tools.
Transport case

71,01 € (58,69 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch SDS-plus-5

The SDS plus-5 drill head guarantees trouble-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling, so the user is not burdened. The drill is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 10 pieces.

52,30 € (43,22 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch flække dyser

The extraction bend is designed for Bosch vacuum cleaners. The extraction bend connects vacuum cleaner hoses and pipes. It is antistatic and has a diameter of 25 mm.
Bend, antistatic

22,31 € (18,44 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch stofzak

Intended for planers. The textile dust bag is intended for collecting grinding dust.
Dust bag for hand planer

26,96 € (22,28 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Maandag - Donderdag:	09:00 - 12:00
Vrijdag:	09:00 - 12:00
Weekend en Deense feestdagen:	Gesloten

Telefoon:	085 301 55 55
Email particulier:	[email protected]
Email zakelijk:	[email protected]