Bosch - pagina 86

Batterij, Li-Ion, 2 Ah

Batterij, 5 Ah, voor Bosch UniversalVac 18; AdvancedCut 18; AdvancedRecip 18; EasyGrassCut 18; UniversalLamp 18

The set's blades are designed for bayonet saws with a universal shaft system. Bayonet saw blade set for metal, Tough Box, 20 pieces, is the universal choice for efficient cutting in metal. The blades are perfect for fine cuts in a wide range of different metal materials and are also suitable for sawing in steel pipes and steel profiles.
Bayonet saw blade set for metal, Tough Box, 20 pieces, is the universal choice for efficient cutting in metal
The blades are perfect for fine cuts in a wide range of different metal materials
Suitable for cutting steel pipes and profiles

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Package contains one piece.

The expert for abrasive diamond grinding head has a high speed for material removal in large areas with abrasive materials such as calcareous plaster, hard plaster, sandstone and highly abrasive concrete. The optimized diamond program of the grinding head delivers impressive work results while the row configuration ensures high speed material removal. The product is developed for concrete, natural stone and artificial stone materials. Dynamic balancing from Bosch ensures vibration-free work which also protects the power tool. The grinding head is suitable for use with concrete grinders

Designed for Bosch air compressor. This charging kit consists of an air hose, a sealing nut, a rubber seal and a valve for balls, bicycles and air mattresses.
Accessory kit
Consists of air hose, sealing nut, rubber seal, valve for balls, bicycles and air mattresses

It is suitable for use with delta sanders. The polishing pad is intended for pre-polishing dirty or scratched lacquered surfaces using polish or abrasive paste.
Polishing pad
Suitable for pre-polishing heavily soiled or scratched surfaces - when using a polishing agent or abrasive paste on smooth surfaces

The handle makes it safe to work with a hammer drill.
Handles for hammer drills

Schuurschijfpad voor boormachines met een diameter van 125 mm en een klemsysteem voor stevige bevestiging.

Bosch schuurschijfpad voor boormachines, 125 mm, klemsysteem is een Bosch-accessoire ontworpen voor gebruik met een boormachine, gespecificeerd met een pad-diameter van 125 mm en een klembevestigingssysteem.

De X-LOCK standaard voor metalen slijpschijven is een betrouwbare keuze voor het slijpen van metaal. De aluminiumoxide schuurkorrel en fenolharsmatrix functionele vulstoffen en additieven zijn goed geschikt voor algemeen metaalwerk. De geoptimaliseerde drielaagse glasvezeldoek van de schijf zorgt voor maximale bescherming tijdens gebruik. Bosch ruw slijpschijven voldoen aan de hoogste veiligheidseisen, zoals EN 12413. Deze schijf is ontworpen om metaal te slijpen. X-LOCK-slijpschijven zijn ook compatibel met standaard haakse slijpers. Dankzij het sleutelloze X-LOCK-systeem kunnen de slijpschijven snel en gemakkelijk worden vervangen. Specificatie: A 24 P BF, diameter mm: 125, boring diameter mm: 22,23, dikte mm: 6,0, rpm (maximale snelheid): 12.250, X-LOCK.

The SDS plus-5 drill bit guarantees trouble-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling work, so the user is not burdened. The drill is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

Boor, voor metaal, spiraalboor, 2 stuks, 2.5 mm, lengte: 57 mm

Boschhammer drill plus-7x 5x315mm

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 10 pieces.

Cirkelzaagblad, voor hout, 190 mm, 24 tanden

The vacuum cleaner tube is intended for Bosch vacuum cleaners.
Tube, chrome-plated

Maaimachine mes, lengte: 370 mm

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks. Drive unit ISO 1173 C6.3, 1/4" external hexagon

Click system for secure locking. The hood fits angle grinders. The protective shield is intended for general scrubbing and grinding work and is equipped with a cover plate for cutting.
Protective caps with cover plate for cutting
Tool-free installation

The disc holder holds the cleaning disc firmly during use
Change discs in seconds thanks to the velcro closure
Robust material provides a long service life
Reusable and machine washable up to 50°C

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and power drills. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw installation, making it suitable for all tasks. Drive unit ISO 1173 C6.3, 1/4" external hexagon

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks. Drive unit ISO 1173 C6.3, 1/4" external hexagon

Masonry size Ø 3,4,5,6,8 & Wood size Ø 3,4,5,6,8 & Metal size Ø 3,4,5,6,8 = Masonry sizes Ø 3-8mm; Wood sizes Ø 3-8mm; Metal sizes Ø 3-8mm

Krachtige dopbit, 1/4", met zes punten, 10 mm, lengte: 50 mm