Bosch - pagina 82

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 10 pieces.

Jigsaw; PST 650; Input power: 500 W; Cutting depth in wood: 65 mm; Cutting depth in steel: 4 mm
Includes:
Transport case; 1 jigsaw blade for wood (T 144 D)

Core cutter, for concrete, masonry, SDS-plus, length: 175 mm

X440 Best for Wood and Paint removes material with impressive speed when sanding old paint, varnish or wood surfaces. The strong abrasive grain of semi-loose aluminum oxide guarantees effective sanding. In addition, the backing material is made of robust X-cloth with a quality tape joint that ensures high strength during demanding work. Furthermore, the grains are provided with an electrostatic open surface that ensures uniform dust removal and uninterrupted sanding. This product is intended for sanding wood and painted surfaces and is suitable for smoothing out edges. The product is also ideal for planar grinding of grooves and edges. The abrasive grain is attached using a fully synthetic resin bond, which ensures exceptional durability in tough tasks. The X440 Best for Wood and Paint abrasive belt fits belt sanders.
Package of 10 pieces.

Routerbit, voor zachthout, hardhout, 8 mm, lengte: 40 mm

Parallelgeleider

Nieten leveren Type 57-bevestiging met een breedte van 10.6 mm, een dikte van 1.25 mm en een lengte van 10.0 mm.

Bosch Nieten type 57 van Bosch zijn ontworpen voor gebruik op uiteenlopende materialen, waaronder papier, kunststofplaten, primerfolie, behanglijm, houten akoestische panelen en met glasvezel versterkte kunststof (GFK).

Steenboor vervaardigd volgens ISO 5468, met een diameter van 12.0 mm en een schacht van 9.0 mm, ontworpen voor boren in steen- en metselwerkmaterialen, waaronder beton en gewapend beton.

Bosch Stone Drill Bit according to ISO 5468 heeft een werklengte van 550 mm en een totale lengte van 600 mm, en is geschikt voor steen, metselwerk, kalkzandsteen, kunststeen, natuursteen, fijn steengoed en betontoepassingen.

The Bosch HSS-R metal drill bit, with an 11 mm diameter and 142 mm length, combines excellent performance with versatility. Ideal for occasional use, it's suitable for a variety of projects, both in home workshops and professional environments.

The fine wire staples fit staplers from the following brands: AEG, Arrow, Black+Decker, Bosch, Esco, kwb, Maestri, Mekano, Metabo, Neckermann/Bullcraft Novus Outifrance Piranha Rocagraf Stanley Skil and Wolfcraft. The fine wire staples type 53 are ideal for a multitude of general DIY tasks and professional stapling jobs. They are suitable for a wide range of thin materials such as fabrics paper flat wooden mouldings and wire mesh fencing. In addition the staples are particularly suitable for applications where the staple back should not be pressed into the material. The staples have a narrow back that allows them to penetrate deeply into the material providing good grip with a very discreet staple back

The narrow-backed staples fit staplers from the following brands: AEG, Bosch, Black+Decker, Bukama, Esco, kwb, Metabo, Novus and Wolfcraft. The narrow-backed staples type 55 are plastic-coated to achieve an adhesive effect that provides a strong and long-lasting hold in a range of different materials. This makes them ideal for both DIY tasks and professional purposes such as installing wall and ceiling cladding with joint and profile board brackets. The staples also have a narrow back that allows them to penetrate deeply into the material and provide a good hold with a very discreet staple back. They are particularly suitable for stapling thin materials where the staple back must not be pressed into the material

Display

Bosch 2 608 000 189 sander accessory 1 pc(s)

Bosch 2 608 000 204 sander accessory 1 pc(s) Sanding sheet

Bosch zaag

Boor, voor metaal, spiraalboor, 5.5 mm, lengte: 93 mm

Reciprozaagblad in bimetal S 922 HF met 2.5 mm / 10 TPI tandsteek, 152 mm totale lengte en 131 mm getande lengte voor het zagen van hout, akoestische panelen en non-ferrometaal zoals aluminium.

Reciprozaagblad, bimetal, S 922 HF is gespecificeerd als type S 922 HF en combineert een fijn 10 TPI-tandpatroon met een lang zaaggedeelte, waardoor het geschikt is voor gecontroleerde sneden in houtmaterialen en non-ferrometalen.

Safety instruction: Only use Bosch hot air guns with electronic regulation. The welding shoe for the hot air gun is a nozzle with a side channel for supplying plastic welding wire with a diameter of up to 5 mm. It must be used in combination with a narrowing nozzle with a diameter of 9 mm.
Welding shoe
with side channel for supplying plastic welding wire up to Ø 5 mm. In connection with narrowing nozzle Ø 9 mm

Cirkelzaagblad, voor hout, 250 mm, 60 tanden

Routerbit, voor massief hout, zachthout, afronding, 42.7 mm, lengte: 66 mm

Drill bit, for concrete, masonry, hammer bit, 10 mm, SDS-plus, length: 1005 mm

Core cutter adapter, hex, length: 88 mm