Bosch - pagina 74

Bosch 2 608 000 072 sander accessory 1 pc(s)

Bosch Screw Belts

The Optiline Wood circular saw blade provides precise cuts in all types of wood. The blade's high-quality precision-ground carbide teeth provide clean cuts, while its core blade, made of dimensionally stable SK5 hardened steel (> 40 HRC), ensures accuracy. At the same time, the blade's expansion slots reduce vibration during use, which reduces noise and heat development. This saw blade is used in all types of wood and wood materials. Depending on the number of teeth, different results can be achieved with all Optiline Wood circular saw blades that have ATB tooth geometry (Alternate Top Bevel): When the blade has a high number of teeth, it provides clean cuts whereas a low number of teeth gives powerful and efficient cuts. It is compatible with handheld miter saws, compound miter saws and table saws.

It has a universal shank of 0.5". The S 522 EF Flexible for Metal bayonet saw blade is intended for use with compact saws. Its fine tooth pitch (1.4 mm) cuts through sheet metal with the most common thicknesses. In addition, the BIM blade (bimetal) is developed for long life when used in standard strength sheet steel. The fine tooth pitch allows cutting of semi-thick sheet metal with a thickness of 1.5 to 4 mm. The blade's short length (100 mm) has a cutting capacity of up to 50 mm and is ideal for use with compact cordless saws.S 522 EF
BIM, laid out, milled
Specially optimized for use in compact saws.
Thin sheets (1.5-4mm)

X440 Best for Wood and Paint removes material with impressive speed when sanding old paint, varnish or wood surfaces. The strong abrasive grain of semi-loose aluminum oxide guarantees effective sanding. In addition, the backing material is made of robust X-cloth with a quality tape joint that ensures high strength during demanding work. Furthermore, the grains are provided with an electrostatic open surface that ensures uniform dust removal and uninterrupted sanding. This product is intended for sanding wood and painted surfaces and is suitable for smoothing out edges. The product is also ideal for planar grinding of grooves and edges. The abrasive grain is attached using a fully synthetic resin bond, which ensures exceptional durability in tough tasks. The X440 Best for Wood and Paint abrasive belt fits belt sanders.
Package of 10 pieces.

The M 1122 EF is a durable bi-metal (BIM) saw blade with set and milled teeth, designed for efficient cutting of metal. With a tooth pitch of 1.4 mm (18 TPI), the blade delivers fast and precise cutting of sheets from 1.5 to 10 mm, as well as closed and open profiles and pipes up to 150 mm in diameter.

Measuring 235 x 36 x 0.9 mm, this blade is particularly suitable for ferrous metals and metal sheets. Its robust construction makes it ideal for both professional and hobby use, providing reliable and precise results in metalworking applications.

The reduction ring for circular saw blades has an adjustable holder hole, so the ring fits perfectly on all machines.
Reduction rings for circular saw blades
Stem blade thickness from 2.2 mm to max. 3.0 mm

It has easy, stepless adjustment of cutting depth and is equipped with a 35 mm extraction port. The handle of the guide sled can be mounted on both sides to increase safety, while the steep extraction port allows for cutting close to edges. The guide sled is a dust collection shield for angle grinders and does not require tools.
Guide sled with suction hood for cutting
Code clamp, screw closure

The SDS plus-5 drill head guarantees trouble-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling, so the user is not burdened. The drill is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

Voor Black & Decker, Bosch, Makita, Metabo, Skil...

If you use a paper filter bag, make sure that the automatic filter cleaning (AFC) is turned off to avoid damaging the paper filter bag.
Paper filter bag

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers.
Package with one piece.

The dust bag fits belt sanders, eccentric sanders, and planing machines as well as universal milling machines. The paper dust bag allows for direct dust extraction.
Dust bag for belt and eccentric sanders, planing machines, universal milling machines

Routerbit

Routerbit, voor hout, massief hout, hardhout, samengesteld hout, Dado, 8 mm, lengte: 70 mm

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The pointed torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks. Drive unit ISO 1173 C6.3, 1/4" external hexagon

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks. Screwdriver bit package extra hard (mixed) with 3 pieces

It has a square shape and is made of cellulose. Used for common dust such as household dust and abrasive materials. The fold filter is a spare filter designed for Bosch vacuum cleaners. Cellulose fold filter, dry suction

It is suitable for working with plaster on metal and for use together with the attachment MA 55 for the Bosch screwdriver GSR 6-45 TE. The screw tape has a coarse thread for quick work with plaster walls.
Fine thread
Suitable for plasterboard on metal (up to a thickness of 0.7 mm)

It is intended for Bosch planers. The sanding sole for planers has a sole with different hole patterns, which allows it to be used on many different machines.
Turning plate for grinding steel 2 608 601 445