Bosch - pagina 62 - Kwaliteit tegen concurrerende prijzen

Bosch METALBOR HSS-CO S 4.1X75MM 10STK

18,03 € (14,90 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch SAVKLINGER TIL GSG SKUMSAV 130MM 2 STK

Leuning

31,80 € (26,28 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch 19 TLG

Boorbitset voor metaal bevat 19 high-speed steel (HSS) HSS-R boorbits in een duurzame metalen koffer, met maten van 1 mm tot 10 mm.

Bosch HSS-R set met metaalboren, 19 stuks is ontworpen voor metaalboren en biedt een brede selectie diameters—1 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 7.5 mm, 8 mm, 8.5 mm, 9 mm, 9.5 mm en 10 mm—netjes georganiseerd in een metalen koffer.

18,40 € (15,21 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch INDLÆGSPLADESÆT TIL GCM 10 s

The movable plate must always be mounted during use. The movable plate is a spare plate for table saws.
Movable plate

8,62 € (7,12 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch SLIBETALLERKEN BESKYTTER Ø150MM 2STK

The sanding plate protector is perfect for abrasive with a mesh design for use with orbital sanders. The sanding plate protector for orbital sanders significantly extends the life of the backing pad. With a strong protective layer with Velcro, it optimizes the adhesion between the abrasive disc and backing pad, especially useful for heavy and demanding tasks. Sanding plate protectors for orbital sanders

11,87 € (9,81 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch KOPSLIBESTEN K 36

The conical grinding cups provide a long lifespan when grinding stone and concrete. Its high-quality silicon carbide abrasive grain is designed for durability in use. It is intended for grinding stone and concrete. The best results and the greatest safety are achieved by only using the conical grinding cups together with two-handed angle grinders with a maximum speed of 8500 o o/min. It is suitable for use with two-handed angle grinders with a maximum speed of 8500 o o/min

20,79 € (17,18 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BOR MULTI SDS-QUICK 6X55X100MM

Bosch SDS-Quick Multi-purpose Drill Bit

6,58 € (5,44 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch LAMELSLIBESKIVE XL SKRÅ BFM 115MM K40

Flap schijf, voor metaal, 115 mm, X-LOCK, M14, korrel: 40

5,46 € (4,51 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR POINTTEC HSS-R 19.0/12MM

Drill bit, for plastic, non-ferrous metal, cast iron, cast steel, alloyed steel, non-alloyed steel, twist bit, 19 mm, cylindrical

17,19 € (14,21 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch SKÆRESKIVE STEN 230X3MM KRØP STD

The Standard for Stone cutting disc provides reliable cutting in stone. The disc contains an efficient blade of silicon carbide and resin, specially developed for working with stone. The product is intended for use with Bosch angle grinders. Bosch cutting discs comply with the maximum safety requirements according to EN 12413.
Cropped

5,74 € (4,74 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch FRÆSER KANT M/KLEJE HM 12.7X13X8MM

The Wood Laminate router bit standard ensures optimal performance when planing. Durability and reliable cutting results are achieved thanks to its high-quality carbide cutting edges. In addition, the hammer drill prevents kickback by limiting the thickness of the generated chips. This hammer drill is designed for planing protruding materials such as laminate and veneer as well as solid wood and composite wood. The ball bearing makes it easy to guide the tool directly on the workpiece without shielding. It is suitable for use with handheld routers and table-mounted portable routers.
0

13,98 € (11,55 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch SLIBEPLADE GEX 125-150AVE Gemiddeld 125MM

They are intended for use on planers. Grinding plates for planers are designed for grinding paint, putty and plaster. They come in a range of different hardnesses depending on the material and desired surface result.
Grinding plate

25,54 € (21,11 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch SLIBESTIFTSÆT 6MM K60 5 STK

Slijpstenen-set levert vijf Bosch gemonteerde slijpstenen met 6 mm schachten en korrel 60 voor het bewerken van ferrometalen zoals staal/ijzer en wapeningsstaal.

Bosch Grinding Point Set bevat slijpstenen in meerdere diameters (25, 15 en 20 mm) met werkbare lengtes van 24–30 mm, geschikt voor consistente materiaalafname op metaaloppervlakken.

12,77 € (10,55 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch 0 (As the text is in Danish and not in English)

Pad set, voor verf, stubborn dirt, sinks, dust, 3 stuks, 63.5 mm, breedte: 63.5 mm

12,78 € (10,56 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR HSS-CO s 9X125MM 5STK

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly, so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package of 5 pieces.

29,85 € (24,67 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch Best for Hout

Schuurband, voor hout, 3 stuks, korrel: 100, 65 mm x 410 mm

8,48 € (7,01 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR SDS-P P3 22X300/350MM

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders for rotary hammers.
Package contains 1 piece.

24,03 € (19,86 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR POINTTEC HSS-R 9.2MM 10STK: 0

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 10 pieces.

21,97 € (18,16 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch PMF 2000 CE

Multifunction tool; PMF 2000 CE; Power input: 220 W; No-load speed: 15,000 - 20,000 rpm; Oscillation angle left/right: 2.8 °
Includes:
BIM plunge-cutting saw blade Wood and Metal, 85 mm, ACZ 85 EB (2 609 256 943); Cardboard box; Delta sanding plate 93 mm, AVZ 93 G (2 609 256 956); Delta sanding sheet set (2 609 256 A54); Allen key; Four-stage depth stop for plunge-cutting saw blades (2 609 256 C61)

91,84 € (75,90 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch STIKSAVKL T 118 G Metaal 5 STK

Zaagblad, voor plaatmetaal, 5 stuks, lengte: 92 mm

9,60 € (7,93 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR SDS P-5 6X260MM

Boor, voor beton, metselwerk, hamerboor, 6 mm, SDS-plus, lengte: 265 mm

7,80 € (6,45 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR SDS-P P3 20X300/350MM

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders for rotary hammers.
Package contains 1 piece.

22,00 € (18,18 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch Metaal TOP T-BOX

The set's blades are designed for bayonet saws with a universal shaft system. Bayonet saw blade set for metal, Tough Box, 20 pieces, is the universal choice for efficient cutting in metal. The blades are perfect for fine cuts in a wide range of different metal materials and are also suitable for sawing in steel pipes and steel profiles.
Bayonet saw blade set for metal, Tough Box, 20 pieces, is the universal choice for efficient cutting in metal
The blades are perfect for fine cuts in a wide range of different metal materials
Suitable for cutting steel pipes and profiles

51,90 € (42,89 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch værktøjskasse + 3år

Klein Kids Tool Set is a great way to encourage children's creativity and develop motor skills. This high-quality and durable set has a safe and durable construction

21,21 € (17,53 €)

Bestelproduct, 13 - 14 werkdagen levertijd

Bosch Cordless Verfspuitsysteem 18V-100 Solo

Spuitpistool, 0.8 L

92,87 € (76,75 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Maandag - Donderdag:	09:00 - 12:00
Vrijdag:	09:00 - 12:00
Weekend en Deense feestdagen:	Gesloten

Telefoon:	085 301 55 55
Email particulier:	[email protected]
Email zakelijk:	[email protected]