Bosch - pagina 59

Stofbox voor cirkelzagen
Past op PKS 55 A; PKS 66 A; PKS 66 AF.

Beitelset, plat, punt, SDS-max

Cirkelzaagblad, voor hout, 190 mm, 48 tanden

Boorstift, voor beton, plastic, staal, zachthout, soft tile, multimaterial, 5 mm, cilindrisch, lengte: 85 mm

Boorstift, voor beton, versterkt beton, hamerboor, 28 mm, SDS-max, lengte: 920 mm

Diamond cutter, voor keramiek, 67 mm, X-LOCK

Boschgrinding stone 83322 3.2mm sic 3 pcs

Insteekzaagblad, voor bakstenen, multifunctioneel, stainless steel profiles, fiber cement, glass fiber reinforced plastic, carbon fiber reinforced plastic, 10 stuks, lengte: 121 mm, breedte: 32 mm

Bosch AVZ 32 RT4

Dremel 640 V-groeffrees

Bladblazer, zonder snoer, 36 V inclusief oplader, 750 m³/h, 100-200 km/h, 3.5 kg

Kettingzaag, draadloos, 18 V, 2.5 Ah, 13.5 cm, 200 mm, 3 kg

Hob cleaner, Powerfully and thoroughly removes stubborn dirt and grease Burnt-in residues can easily be removed with a glass scraper after pretreatment

Boorstift, voor beton, metselwerk, versterkt beton, 16 mm, SDS-max, lengte: 740 mm

Cirkelzaagblad, voor hout, 235 mm, 60 tanden

Boor, spiraalboor, 8 mm, cilindrisch, lengte: 400 mm

The drill bit is equipped with a cylindrical shaft system. The machine-driven drill bit enables precise drilling results in soft and hard wood, especially for deep dowel holes. Split-free holes, for example in timber, are drilled using the finely ground drill head tip with two guide edges. The centering point makes it possible to place the hole precisely and thus achieve precise results. The special groove ensures efficient removal of chips and prevents jamming while achieving an accurate hole diameter. The drill bit can be used for soft and hard wood.
Total length 400 mm

Boorstift, hamerboor, 14 mm, SDS-plus, lengte: 1000 mm

Oscillerende multitool, 220 W

The Expert for Aluminum circular saw blade has an HLTCG tooth shape (High-Low Triple Chip Ground) that gives the blade strength for cutting aluminum. The Expert for Aluminum circular saw blade delivers perfect cuts in aluminum. The special, extra-hard Microteq teeth, produced internally by Bosch, are made of very fine carbide grains that give the blade maximum life and cutting ability. The strength is further reinforced by the blade's Proteqtion coating, which prevents corrosion and ensures reliable cutting performance with reduced friction. In addition, the product is equipped with anti-vibration holes to ensure high cut quality and significantly reduce vibration and noise levels. This saw blade is used for aluminum, non-ferrous metals, plastic, epoxy and wood.

Beitel, voor metselwerk, mortel, spade, SDS-max, lengte: 400 mm, breedte: 80 mm

Cirkelzaagblad, voor hout, 216 mm, 24 tanden

Wi-Fi-module voor gebruik met Bosch Climate 6100i, 8100i of 9100i.

The Optiline Wood circular saw blade provides precise cuts in all types of wood. The blade's high-quality precision-ground carbide teeth provide clean cuts, while its main blade, made of dimensionally stable SK5 hardened steel (> 40 HRC), ensures accuracy. At the same time, the blade's expansion slots reduce vibration during use, which has a noise-reducing effect and reduces heat development. This saw blade is used in all types of wood and wood materials. Depending on the number of teeth, different results can be achieved with all Optiline Wood circular saw blades that have ATB tooth geometry (Alternate Top Bevel): When the blade is equipped with a high number of teeth, it provides clean cuts, whereas a low number of teeth provides powerful and efficient cuts. It is compatible with handheld miter saws, compound miter saws and table saws.

Diamantdoorslijpschijf voor keramische tegels, met een diameter van 125 mm, 22,23 mm asgattype en 1,7 mm snijbreedte.

Bosch diamantdoorslijpschijf voor tegels, Ø 125 mm is ontworpen voor het snijden van keramiek en is gespecificeerd voor gebruik met de Bosch UniversalGrind 18V-75.