Bosch - pagina 18

Slijpschijf, voor metaal, metalen buizen, non-ferrometaal, staal, gietijzer, profielen, 115 mm

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Package contains 2 pieces.

Schuurspons, pak van 3

System accessories; Extension hose 6 m (130 bar)

System accessories; Extra strong wire 30 cm

Hogesnelheidsfrees, voor zachthout, hardhout, speedboor, plat, 6 stuks, 25 mm, 13 mm, 20 mm, 16 mm, 22 mm, 19 mm, zeskant

Slijpschijf, voor metaal, 125 mm

Schuurband, voor hout, 3 stuks, korrel: 220, 75 mm x 508 mm

C430 Expert for Wood and Paint has an impressively long lifespan when sanding wood, veneer, and solid surfaces. In addition, the electrostatic, open surface with spaces between the grains ensures uniform sanding and prevents clogging. The strong abrasive grains are resistant to wear, allowing for prolonged and repeated use. This product is intended for cleaning up and sanding paint, varnish, putty, primer and wood-based materials; it is suitable for intermediate sanding of lacquer on surfaces. It is also suitable for sanding after wetting certain materials as well as smoothing out feather edges. The C430 Expert for Wood and Paint abrasive sheet fits all orbital sanders. The fully synthetic resin-bonded grain provides a long service life. The extremely flexible C-/B- paper backing allows the product to be folded without cracking.
Package of 5 pieces.

De X-LOCK snijschijf Standard voor Inox zorgt voor betrouwbare eigenschappen bij staal. De smalle snijkant van de schijf zorgt voor soepele sneden zonder veel inspanning. Bovendien is de schijf vrij van ijzer, zwavel en gechloreerde vulstoffen. Bosch snijschijven voldoen aan de hoogste veiligheidseisen zoals EN 12413. Gebruik deze schijf om staal te snijden. X-LOCK-snijwielen passen ook op standaard haakse slijpers. Dankzij het sleutelloze X-LOCK-systeem kunnen de slijpschrijven snel en gemakkelijk worden vervangen. Specificatie: WA 60 T BF, diameter mm: 125, boring diameter mm: 22,23, dikte mm: 1,6, X-LOCK

C430 Expert for Wood and Paint has an impressively long lifespan when sanding wood, veneer, and solid surfaces. In addition, the electrostatic, open surface with spaces between the grains ensures uniform sanding and prevents clogging. The strong abrasive grains are resistant to wear, allowing for prolonged and repeated use. This product is intended for cleaning up and sanding paint, varnish, putty, primer, and wood-based materials; it is suitable for intermediate sanding of lacquer on surfaces. It is also suitable for sanding after wetting certain materials as well as smoothing out feather edges. The C430 Expert for Wood and Paint abrasive sheet fits all orbital sanders. The fully synthetic resin-bonded grain provides a long lifespan. The extremely flexible C-/B- paper backing allows the product to be folded without cracking.
Package of 5 pieces.

Polishing disc, for metal, 115 mm, X-LOCK, M14, round, grit: 24

For Bosch, Einhell, Kress, Skil,...

For use with jigsaws featuring fastening systems with T-shanks. The T 101 AOF Clean for Hard Wood jigsaw blade provides clean, curved cuts in wood. Its precision-ground teeth with toothed construction enable clean cuts. Additionally, its narrow blade is optimized for curved cuts. It is made of BIM (bimetal), and its fully hardened HSS (high-speed steel) tooth list is attached to a high-elastic HCS (carbon-rich steel) construction, making the blade suitable for cutting hard materials such as laminate flooring. Furthermore, a pointed-tooth design reduces wear and tear. It features a very fine tooth height (1.4 mm) for cutting very thin slices in woodworking materials ranging from 1.5-15 mm thick.
T 101 AOF
BIM, pointed-toothed, precision-ground and toothed
Hardwood, laminates (1.5-15 mm), laminated boards/HPLs, plywood; especially suited to curved cuts; no tearing up

Schroevendraaier met bitset, 46 stuks, in koffer

Jab saw blade, for chipboard, plywood, fibreboard, softwood, laminated panels, non-abrasive wooden materials, 3 pieces, T-shank, length: 100 mm

X440 Best for Wood and Paint removes material with impressive speed when sanding old paint, varnish or wood surfaces. The strong abrasive grain of semi-loose aluminum oxide guarantees effective sanding. In addition, the backing material is made of robust X-cloth with a quality tape joint that ensures high strength during demanding work. Furthermore, the grains are provided with an electrostatic open surface that ensures uniform dust removal and uninterrupted sanding. This product is intended for sanding wood and painted surfaces and is suitable for smoothing out edges. The product is also ideal for planar grinding of grooves and edges. The abrasive grain is attached using a fully synthetic resin bond, which ensures exceptional durability in tough tasks. The X440 Best for Wood and Paint abrasive belt fits belt sanders.
Package of 3 pieces.

Chuck key, 6 mm, length: 110 mm

The reserve key fits toothed chuck drill chucks. It is important to choose the correct key type (A/B/C/D/F/G)

Polijstkap voor excentrische schuurmachine, 125 mm diameter, ontworpen voor polijsten en oppervlaktewerk op geselecteerde materialen waaronder hout, lak, kunststoffen, Corian, akoestische panelen, glasvezelversterkte kunststof, oude verf en acrylglas (plexiglas/PMMA).

Polijstkap voor excentrische schuurmachine, 125 mm past op 125 mm schuurpads en ondersteunt veelzijdige afwerkingstaken op gangbare werkplaatsmaterialen, van zacht en hard hout tot gecoate oppervlakken en kunststoffen.

Flap schijf, voor metaal, 125 mm, X-LOCK, M14, korrel: 60

De X-LOCK snijschijf Standard voor Inox zorgt voor betrouwbare eigenschappen bij staal. De smalle snijkant van de schijf zorgt voor soepele sneden zonder veel inspanning. Bovendien is de schijf vrij van ijzer, zwavel en gechloreerde vulstoffen. Bosch snijschijven voldoen aan de hoogste veiligheidseisen zoals EN 12413. Gebruik deze schijf om staal te snijden. X-LOCK-snijwielen passen ook op standaard haakse slijpers. Dankzij het sleutelloze X-LOCK-systeem kunnen de slijpschrijven snel en gemakkelijk worden vervangen. Specificatie: WA 60 T BF, diameter mm: 125, boring diameter mm: 22,23, dikte mm: 1,6, X-LOCK

To Bosch, Hitachi, Makita, Ryobi,...