Bosch 2 609 256 806 circular saw blade 15 cm

Cirkelzaagblad, voor hout, 235 mm, 60 tanden

Schuurpapier set, 25 stuks, rechthoekig, korrel: 60, 80, 120, 240, 93 mm x 230 mm

Cirkelzaagblad, voor hout, 150 mm, 24 tanden

The Speedline Wood circular saw blade provides precise length and cross-section cuts in all types of wood. Its high-quality precision-ground carbide teeth make the blade strong enough for fast cutting, while its core blade, made of dimensionally stable SK5 hardened steel (> 40 HRC), ensures accuracy. At the same time, the blade's expansion slots reduce vibration during use, which has a noise-reducing effect and reduces heat development. This saw blade is suitable for use with all types of wood and wood materials. The Speedline Wood circular saw blade provides precise length and cross-section cuts in all types of wood. It is compatible with handheld saws and table saws.

The Expert for Steel circular saw blade has an MTCG tooth configuration (Multi-Purpose Triple Chip Grind) that ensures a long lifespan. The Expert for Steel circular saw blade provides extreme impact resistance in steel. Its special, extra-hard Microteq teeth are internally manufactured by Bosch from extra-durable hard metal grains, providing high cutting performance. The strength is further reinforced by the blade's Proteqtion coating, which prevents corrosion and ensures reliable cutting performance with reduced friction. Additionally, the blade is equipped with anti-vibration holes that provide high cut quality and significantly reduce vibration and noise levels

Schuurbladenset voor boormachine met 5 stuks, 125 mm diameter en korrel 60, ontworpen voor het schuren van verf, krasvaste lak, plamuur en een reeks houtmaterialen.

Schuurbladenset met 5 stuks voor boormachine is geschikt voor gebruik op coatings zoals verf, krasvaste lak en plamuur, evenals zachthout, spaanplaat, hardhout/massief hout en composietmaterialen.

Routerbit voor hout, afrondfrees, lengte: 53 mm

The cup nylon brush provides a good, fine finish on various materials without damaging the surface. It is equipped with K80 aluminum oxide-coated nylon bristles that perfectly conform to the contours of the object. The abrasive coating continuously releases abrasive grains during use, ensuring consistent material removal. This cup nylon brush is suitable for cleaning tasks such as removing rust from small to medium-sized metal surfaces. It is also suitable for sanding paint, smoothing, matte sanding and cleaning metal, PVC and wood. It can also be used for texturing wood. The brush wires are available in different thicknesses depending on how strong the abrasive effect needs to be. Thicker wires are more aggressive and provide a coarser but faster surface finish while thinner wires provide finer, smoother surface results. It is designed for use with drills with a 6 mm shaft.
Cup steel brush - nylon wire with corundum abrasive K80
Suitable for removing paint, removing rust, smoothing out surfaces and cleaning wood, metal and PVC on smaller to medium-sized areas; texturing wood.
Perfectly adapts to the outline of the object without significantly changing its surface.
Works with constant breakdown effect as abrasives are constantly released during use.

Boor, spiraalboor, cilindrisch, lengte: 86 mm

C430 Expert for Wood and Paint has an impressively long lifespan when sanding wood, veneer, and solid surfaces. In addition, the electrostatic, open surface with spaces between the grains ensures uniform sanding and prevents clogging. The strong abrasive grains are resistant to wear, allowing for prolonged and repeated use. This product is intended for cleaning up and sanding paint, varnish, putty, primer and wood-based materials; it is suitable for intermediate sanding of lacquer on surfaces. It is also suitable for sanding after wetting certain materials as well as smoothing out feather edges. The fully synthetic resin-bonded grains provide a long lifespan. The extremely flexible C-/B-paper backing allows the product to be folded without cracking forming. Sandpaper C430 Expert for Wood and Paint fits multi-sanders.
Package of 5 pieces.

It is intended for use on screwdrivers. The polishing sponge is used for polishing various surfaces such as metal and paint.
Polishing sponge
Foam rubber with rubber disc

Puzzelzaagblad, voor dun plaatmetaal, 5 stuks, lengte: 92 mm

Boor, spiraalboor, 8 mm, cilindrisch, lengte: 117 mm

Boorkop met SDS plus-adapter biedt een 1.5–13.0 mm spanbereik en ondersteunt zowel rechts- als linksom draaien.

Bosch Boorkop met sleutel met SDS plus-adapter is ontworpen voor SDS plus-gereedschapshouders en biedt flexibele bitklemming binnen het opgegeven bereik voor een stevige bevestiging tijdens boorwerkzaamheden.

Flap schijf, korrel: 40, 125 mm

They are intended for use on planers. Grinding plates for planers are designed for grinding paint, putty and plaster. They come in a range of different hardnesses depending on the material and desired surface result.
Grinding plate

Bitset voor interne Torx (T) schroeven met 10 stuks, inclusief een magnetische universele houder en 25 mm bits met een 1/4" externe zeskantschacht (ISO 1173 C6.3).

Bosch 10-delige schroevendraaierbitset standaard voor interne Torx schroeven (T) bevat bits T10, T15, T20, T25 (2x), T27, T30 en T40 (2x), plus een magnetische universele houder voor stevige bitfixatie en snelle wissels.

Glas- en tegelboor van Bosch met een diameter van 4.0 mm en een totale lengte van 64 mm voor boren in natuurlijke materialen zoals glas, steen en wandtegels.

Bosch Glass and Tile Drill Bit is ontworpen voor nauwkeurige boortaken in harde, gladde oppervlakken, met specificaties die duidelijk geschikt zijn voor veelvoorkomend werk op glas, steen en tegels.

C430 Expert for Wood and Paint has an impressive long lifespan when sanding in wood, veneer, and solid surfaces. In addition, the electrostatic, open surface with spaces between the grains ensures uniform sanding and prevents clogging. The strong abrasive grains are resistant to wear, allowing for prolonged and repeated use. This product is intended for cleaning up and sanding paint, varnish, putty, primer and wood-based materials; it is suitable for intermediate sanding of lacquer on surfaces. It is also suitable for sanding after wetting certain materials as well as smoothing out feather edges. The fully synthetic resin-bonded grains provide a long lifespan. The extremely flexible C-/B- paper backing allows the product to be folded without cracking forming. Sandpaper C430 Expert for Wood and Paint fits orbital sanders.
Package of 10 pieces.

Diamantslijper, voor tegels, keramiek, harde keramiek, 20 mm, M14

Router bit set, 6 stuks

X440 Best for Wood and Paint removes material with impressive speed when sanding old paint, varnish or wood surfaces. The strong abrasive grain of semi-loose aluminum oxide guarantees effective sanding. In addition, the backing material is made of robust X-cloth with a quality belt joint that ensures high strength during demanding work. Furthermore, the grains are provided with an electrostatic, open surface that ensures uniform dust removal and uninterrupted sanding. This product is intended for sanding wood and painted surfaces and is suitable for smoothing out edges. The product is also ideal for planing grooves and edges. The abrasive grain is attached using a fully synthetic resin bond, which ensures exceptional durability in tough tasks. The X440 Best for Wood and Paint sanding belt fits belt sanders.
Package of 3 pieces.

Filter

Boor, spiraalboor, 4 mm, cilindrisch, lengte: 75 mm (pak van 2)