Menu

Help

Bosch - pagina 105

Producten in je zoekopdracht: 3867
Bosch BITS T25 25MM 1/4 STANDARD 2STK

Schroefbit met T-schroefkop, maat 25, en 25 mm lengte voor compatibele schroefwerkzaamheden.
Standaard T schroefbit is gespecificeerd met een T (Torx) schroefkop, schroefkopmaat 25 en 25 mm lengte, waardoor het eenvoudig is de bit af te stemmen op de vereiste schroefkop en toepassing.

4,53 € (3,74 €)

2617409

Extern magazijn, 7 - 8 werkdagen levertijd
Bosch router bit - for hardwood abrasive materials
Frees, voor hardhout, schurende materialen, 6 mm, lengte: 53 mm

19,29 € (15,94 €)

3313808

Extern magazijn, 7 - 8 werkdagen levertijd
Bosch EXPERT SHEET METAL HOLE SAWS FOR ROTARY DRILLS/DRIVERS & IMPACT DRILL/DRIVERS 17MM
Long Life Cutting Holes in Stainless Steel
Exceptional durability is built in with Bosch Carbide Technology.
Individually ground teeth made from fine, hard Carbide.
With integrated thread.

34,00 € (28,10 €)

3185710

Extern magazijn, 7 - 8 werkdagen levertijd
Bosch EXPERT SHEET METAL HOLESAW FOR DRILLS/DRIVERS & IMPACT DRILLS/DRIVERS
Long life when hole cutting stainless steel
Exceptional durability is a given with Bosch Carbide Technology.
Individually ground teeth made of fine carbide.
With integrated thread.

57,93 € (47,88 €)

3184355

Extern magazijn, 7 - 8 werkdagen levertijd
Bosch EXPERT SHEET METAL HOLE SAWS FOR ROTARY DRILLS/DRIVERS & IMPACT DRILL/DRIVERS 27MM
Long Life Cutting Holes in Stainless Steel
Exceptional durability is built in with Bosch Carbide Technology.
Individually ground teeth made from fine, hard Carbide.
With integrated thread.

48,67 € (40,22 €)

3185565

Extern magazijn, 7 - 8 werkdagen levertijd
Bosch EXPERT SHEET METAL HOLE SAWS FOR ROTARY DRILLS/DRIVERS & IMPACT DRILL/DRIVERS 37mm
Long Life Cutting Holes in Stainless Steel
Exceptional durability is built in with Bosch Carbide Technology.
Individually ground teeth made from fine, hard Carbide.
With integrated thread.

54,84 € (45,32 €)

3185061

Extern magazijn, 7 - 8 werkdagen levertijd
Bosch EXPERT SHEET METAL HOLE SAWS FOR ROTARY DRILLS/DRIVERS & IMPACT DRILL/DRIVERS 35MM
Long Life Cutting Holes in Stainless Steel
Exceptional durability is built in with Bosch Carbide Technology.
Individually ground teeth made from fine, hard Carbide.
With integrated thread.

51,76 € (42,78 €)

3185144

Extern magazijn, 7 - 8 werkdagen levertijd
Bosch Impact Control Torsion Pozi Screwdriver Bits PZ2 25 mm 2 pcs.
25 mm schroevendraaierbit, 2xPZ2

4,02 € (3,32 €)

3053221

Extern magazijn, 7 - 8 werkdagen levertijd
Bosch HAMMERBOR SDS-P P3 25X200/250MM
The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders for rotary hammers.
Package contains 1 piece.

18,28 € (15,11 €)

2840761

Extern magazijn, 7 - 8 werkdagen levertijd
Bosch HAMMERBOR SDS-P P3 8X400/460MM
The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders.
Package of 1 piece.

9,33 € (7,71 €)

2840724

Extern magazijn, 7 - 8 werkdagen levertijd
Bosch HAMMERBOR SDS-P P3 14X100/160MM
The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders for rotary hammers.
Package contains 1 piece.

8,66 € (7,16 €)

2840739

Extern magazijn, 7 - 8 werkdagen levertijd
Bosch BETONBOR SILVER SLAGBOR 10X300MM
The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill bit is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill bit's efficient U-shape with 2 flutes ensures effective dust removal, less friction, reduced heat development and wear, and extends the life of the drill bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill bit is PGM-certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill bit is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package with 1 piece.

8,91 € (7,36 €)

2839158

Extern magazijn, 7 - 8 werkdagen levertijd
Bosch HAMMERBOR SDS-P P3 10X400/460MM
The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders for rotary hammers.
Package contains 1 piece.

9,92 € (8,20 €)

2840731

Extern magazijn, 7 - 8 werkdagen levertijd
Bosch HAMMERBOR SDS P-5 18X600MM
Drill bit, for concrete, masonry, hammer bit, 18 mm, SDS-plus, length: 600 mm

38,89 € (32,14 €)

2838882

Extern magazijn, 7 - 8 werkdagen levertijd
Bosch METALBOR HSS-G DIN 340 9X115MM
The long ground HSS spiral drill bit for drilling deep holes through metal with maximum precision. Its length allows for deep drilling with this long drill head. The exposed 135-degree two-part self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the two-part tip, it is also unnecessary to mark pilot holes in advance or pilot bore up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. The long ground HSS spiral drill bit is manufactured according to DIN 340. The drill head is of type N (not angle) with a 135-degree tip and a diameter tolerance of h8. This drill head is designed for drilling deep holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. It has a cylindrical shaft system (the shaft has the same diameter as the drill head) and is intended for use in drilling stands and screwdrivers
Package contains one piece.

12,08 € (9,98 €)

2838876

Extern magazijn, 7 - 8 werkdagen levertijd
Bosch HAMMERBOR SDS-P P3 10X150/210MM
The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders.
Package of 1 piece.

7,21 € (5,96 €)

2840727

Extern magazijn, 7 - 8 werkdagen levertijd
Bosch DIAMANTBOR TØR 65X150MM 1/2PROF

58,75 € (48,55 €)

2838725

Extern magazijn, 7 - 8 werkdagen levertijd
Bosch METALBOR HSS-G S 9.5X125MM
The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral bore head is manufactured according to DIN 338. The bore head is of type N (notch angle) with a 135-degree tip and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the bore head) and is intended for use in drilling stands and screwdrivers.
Package with one piece.

5,51 € (4,55 €)

2838653

Extern magazijn, 7 - 8 werkdagen levertijd
Bosch METALBOR HSS-CO s 6X93MM 10STK
Boor, spiraalboor, 10 stuks, 6 mm, H8, cilindrisch, lengte: 93 mm

25,56 € (21,12 €)

2838628

Extern magazijn, 7 - 8 werkdagen levertijd
Bosch METAALBOOR HSS-G 9.2X125MM 5 STUKS
The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers.
Package with five pieces.

20,39 € (16,85 €)

2838520

Extern magazijn, 7 - 8 werkdagen levertijd
Bosch METALBOR HSS-CO S 5.1X86MM 10STK

23,10 € (19,09 €)

2838625

Extern magazijn, 7 - 8 werkdagen levertijd
Bosch BITS PZ3 L:25MM 25 STK

19,38 € (16,02 €)

2837677

Extern magazijn, 7 - 8 werkdagen levertijd
Bosch METALBOR HSS IMPACT 4.2MM
This drill bit is compatible with a 1/4 inch hexagonal shaft system for versatile use with screwdrivers, impact wrenches and drilling rigs. The Impact Control HSS spiral drill bit provides extremely robust drilling in metal, especially with screwdrivers. The extremely strong core is extremely robust. The spiral hammer drill bit is precision ground from solid metal and has an oxidized notch that gives it outstanding surface quality for cutting through materials with reduced wear. It is suitable for use on alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, sheet metal and plastic.
Package of 1 piece.

5,67 € (4,69 €)

2838214

Extern magazijn, 7 - 8 werkdagen levertijd
Bosch BIT T8 L:49MM
It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The bit's tapered torsion zone easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks

5,07 € (4,19 €)

2837702

Extern magazijn, 7 - 8 werkdagen levertijd
Bosch HAMMERBOR SDS P-5 20X600MM
Drill bit, for concrete, masonry, hammer bit, 20 mm, SDS-plus, length: 600 mm

38,89 € (32,14 €)

2837452

Extern magazijn, 7 - 8 werkdagen levertijd
- «
- 1
- ...
- 103
- 104
- 105
- 106
- 107
- ...
- 155
- »