Boren en bits - pagina 71

Gatenzaag, voor bakstenen, spaanplaat, zachthout, plastic verstevigd met glasvezel, soft tile, 19 mm

Boorstift, voor beton, plastic, staal, zachthout, soft tile, multimaterial, 10 stuks, 4 mm, cilindrisch, lengte: 75 mm

Boorstift, voor beton, metselwerk, versterkt beton, 25 mm, SDS-max, lengte: 320 mm

Bosch Bit extra-hard

The SDS plus-5 drill bit ensures problem-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling, so the user is not burdened. The drill bit is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

Spaakwielborstel, 19 mm, lengte: 44 mm (pak van 2), voor Dremel 200, 3000, 4000, 4200, 7700, 8100, 8200

Boorstift, voor metaal, 2.5 mm, lengte: 57 mm

Bosch Bit extra-hard

Bahco 3833-111-C gatenzaag

Boorstift, voor metaal, 4 mm, lengte: 75 mm, voor Makita DHP482RTJ

Impact screwdriver bit, 2 stuks, torx, T20, zeskant, lengte: 25 mm

Makita D-34182 accessoire voor boorhamer

Wera 853/4 ACR SL schroevendraaierbit 1 stuk(s)

Boorstift, voor beton, versterkt beton, bakstenen, concrete with steel reinforcement, hamerboor, 14 mm, SDS-plus, lengte: 215 mm, voor XGT HR008GM202

Boorstift, hamerboor, 9 mm, SDS-plus, lengte: 215 mm

Boorstift, voor beton, metselwerk, versterkt beton, graniet, gneis, hamerboor, 18 mm, SDS-plus, lengte: 1000 mm

Boorstift, hamerboor, 7 mm, SDS-plus, lengte: 115 mm

Diamantboorset, voor beton, 5 stuks, 5 mm, 6 mm, 8 mm, 4 mm, lengte: 100 mm, 90 mm

Boorstift, hamerboor, 15 mm, SDS-plus, lengte: 165 mm

Boorstift, hamerboor, 7 mm, SDS-plus, lengte: 265 mm

Bahco 7800DM-30 dopsleutel & dopsleutelset Socket

Boorstiftset, 31 stuks, 1/4"

Bahco 7805DM-13 krachtdop

IRWIN 10501932 boor Steenboor

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Package contains one piece.