Boren en bits - pagina 37

BETONBOR 8X75X120MM

Bosch SDS-Quick Concrete Drill Bit

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and power drills. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hardness quality, and enables sufficient performance in all tasks. The pointed torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw installation, making it suitable for all tasks

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, and extends the life of the bit. The drill head provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers.
Package with 10 pieces.

The SDS plus-5 drill head guarantees trouble-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling, so the user is not burdened. The drill is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the bit has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shank system (the shank has the same diameter as the bit) and is intended for use in drilling stands and screwdrivers.
Package with 10 pieces.

The SDS plus-5 drill head guarantees trouble-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling, so the user is not burdened. The drill is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

Flap wheel, for wood, metal, polyvinyl chloride (PVC), 60 mm, width: 40 mm, grit: P60

Boorstift, voor beton, plastic, staal, zachthout, soft tile, multimaterial, 6 mm, zeskant, lengte: 100 mm

Bosch PRO Wood slangenboor

2 x Bosch professionele schroevendraaier bit PH3 inzetbit, lengte 25 mm, zeskantschacht

Drill bit, for metal, twist bit, 10 pieces, 3 mm, hex, length: 72 mm

The CYL-9 Ceramic tile drill head is a standard drill head for drilling in tiles. The practical drill head is suitable for dry drilling without cooling. The simple design without notches is particularly suitable for drilling in soft to medium-hard tiles. Drilling without impact function at low speeds. The drill head is compatible with power and battery-powered drills with a cylindrical shaft system. Package of 1 piece.

The drill bit has a hexagonal shank system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the drill bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the drill bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the drill bit and precision-ground main cutting edge produce precise holes. Suitable for use in construction trades, by carpenters and roofers, it is suitable for both softwood and hardwood
Total length 160 mm

The Impact Control screwdriver bit is very robust and suitable for demanding tasks, and can even withstand the high power of impact wrenches. The bit has an extended torsion zone, which makes it extremely durable for long-term work. Modified S2 steel and an optimized heat treatment process provide extra durability for high performance in construction installations or heavy industrial work. The set of Pick and Click screwdriver bits with Impact Control in 36 pieces also includes sockets as well as the Impact Control Universal Holder Standard Magnetic and Impact Control Universal Holder Quick Release. These holders provide extra grip on the bit when mounting screws with power tools, while the Quick Release function allows for quick and easy changes. The screwdriver bit is part of the Bosch Pick and Click system, which allows for customized accessory sets. The click-fitting system makes it easy to change bits and drills to create a personalized set. The bit comes in a plastic holder that can easily be clicked into empty Pick-and-Click boxes (size M & L) for tailored bit sets. It has an external hexagonal shaft of 1/4 inch for use with screwdrivers, especially impact wrenches.Package of 8 pieces (index)

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 5 pieces.

Routerbit, Recht, 4 mm, lengte: 51 mm

Routerbit, Recht, 11 mm, lengte: 51 mm

Schroefbit, 3 stuks, phillips, PH2, zeskant, lengte: 157 mm

Solo 2000 RPM 1,3 kg Zwart, Grijs, Rood

Boorstift, voor beton, versterkt beton, bakstenen, iron-reinforced concrete, hamerboor, 12 mm, SDS-plus, lengte: 265 mm, voor XGT HR008GM202

Boorstift, voor beton, versterkt beton, graniet, gehard beton, gneis, hamerboor, 5 mm, SDS-plus, lengte: 265 mm

Boorstift, voor beton, versterkt beton, graniet, gehard beton, gneis, hamerboor, 13 mm, SDS-plus, lengte: 265 mm