Alu pex systemen - pagina 6

Perskoppeling voor warmwater- en radiatorsystemen. PPSU-kunststof met roestvrijstalen/aluminium perskap, gegarandeerd lekvrij als er niet wordt geperst. Kalibratievrij. Alleen te gebruiken met Uponor MLC-buizen en met Uponor goedgekeurde persgereedschappen.

Henco 40 x 40 x 40 mm PVDF pers T-stuk voor water-, verwarmings- en koelinstallaties. Max. 16 bar.

Raxofix Connection screw fitting with SC-Contur- for manifold- silicium bronze- press connection, Viega plug-in seatd: 16, G: 34

Geberit Mepla adapter met vrouwelijke draad: d=20mm, Rp=3/4

Raxofix T-stuk met SC-Contur-siliciumbrons-persaansluitingen d1: 25, d2: 25, d3: 16

Raxofix T-stuk met SC-Contur-siliciumbrons-persaansluitingen d1: 32, d2: 32, d3: 32

Raxofix-adapter met SC-Contur-siliciumbrons-persaansluiting, Rp-draad: 32, Rp: 1

Henco PVDF press tee with socket thread in the middle. 40x3/4x40. CW602.

Geberit Mepla adapter met mannelijke draad: d=32mm, R=1 1/4

Used with Roth alu-laserplus pipe and Roth tools

Aansluiting op 75 mm van 75 mm HENCO Super Size. Max. 10 bar.

Henco 16 mm x 12 PVDF pers rechte mannelijke adapter voor water-, verwarmings- en koelinstallaties. Max. 16 bar.

Compressie nippelhuls Uponor 3/4

Raxofix-koppeling met SC-Contur-Siliciumbrons - persverbinding d1: 25, d2: 25

Raxofix-koppeling met SC-Contur-siliciumbrons-persverbinding d1: 25, d2: 20

Uponor mal met pakking 1.

Henco 50 x 20 x 50 mm PVDF pers T-stuk voor water-, verwarmings- en koelinstallaties. Max. 16 bar.

PPSU koppeling Uponor 40X32 mm

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Henco 26 x 20 x 26 mm PVDF pers T-stuk voor water-, verwarmings- en koelinstallaties. Max. 16 bar.

Henco 32 x 26 x 32 mm PVDF pers T-stuk voor water-, verwarmings- en koelinstallaties. Max. 16 bar.

Henco 32 x 20 x 32 mm PVDF pers T-stuk voor water-, verwarmings- en koelinstallaties. Max. 16 bar.

45° Presbend PPSU Uponor 50 x 50 mm.

Perskoppeling Uponor 50X32 mm.

Buigveer HENCO, intern 20X2 mm, L = 500 mm