Productnummer: 3417421
AXAGON SuperSpeed USB-C & USB-A SD / microSD kaartlezer
Card reader with SuperSpeed USB-C and USB-A connectors, metal housing, dual slots that support SD and microSD up to 2 TB and simultaneous card handling.
Compact plug-and-play device AXAGON SuperSpeed USB-C & USB-A SD / microSD Card Reader connects directly to PCs, laptops and mobile devices and uses a USB 3.2 Gen 1 interface for faster transfers.
- Supports SD, SDHC, SDXC and microSD formats up to 2 TB and CF cards up to 128 PB
- USB 3.2 Gen 1 (USB 3.0) interface, transfer rates up to 5000 Mbit/s; UHS-I support up to 104 MB/s
- Two card slots with simultaneous operation and 2 LUN (appears as two drives)
- Metal housing with protective caps and hinge for keyring attachment
- Plug and play with hot-swap support; compatible with Windows, macOS, Linux and Android
Durable, portable solution for straightforward high-speed transfers between memory cards and devices.
Op voorraad
17,04 €
14,08 € excl. BTW
Goedkoopste privé verzending 4,99 €
6 stks
Op voorraad - 2-3 werkdagen levertijd
Universal Compact SuperSpeed USB Memory Card Reader AXAGON CRE-SAC supports all current versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB.
With two USB-C and USB-A connectors, the reader can be directly connected to desktop computers or laptops, as well as cell phones and tablets with a USB-C connector.
With USB 3.2 Gen 1 (USB 3.0) interface, the reader achieves significantly higher data rates for UHS-I SD cards compared to USB 2.0 interface readers.
The card reader enables simultaneous handling of cards in both slots and direct copying between them.
The metal body of the reader not only looks great, but also increases its durability. Both connectors are protected by carrying caps when carrying them. The included hinge allows the card reader to be attached to a key ring.
The installation can be done even by an amateur - you insert the reader into the USB port of your computer or mobile device and the rest is completely automatic.
Card reader - two slots, supports the following formats:
• Micro SD slot: microSD / microSDHC / microSDXC / TransFlash,
• SD slot: Secure Digital, SDHC, SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with miniSD, microSD, microSDHC, microSDXC, MMC Micro adapter.
The reader supports the following flash card specifications:
• SD 1.0 / 1.1 (SD - Secure Digital, up to 2GB).
• SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB).
• SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB).
• MMC and eMMC 3.x/4.0/4.1/4.2/4.3/4.4/4.5/5.0 (8-bit).
• Support for SD 3.01 and SD Jukebox applications (CPRM functions).
• Ultra High Speed UHS-I support (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s.
• Supports ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function.
• 2 LUN - in file managers, the reader is indicated as two disk drives.
• FAT 12/16/32, NTFS, exFAT (FAT 64) file formats support.
Other features:
• SuperSpeed USB - USB 3.2 Gen 1 interface (before USB 3.1 Gen 1 / USB 3.0).
• Also compatible with USB 3.2 Gen 2, backward compatible with USB 2.0 and USB 1.1.
• Supports transmission rates 1.5 / 12 / 480 / 5000 Mbit/s (low / full / high / super speed).
• Full Plug and Play and Hot Swap support.
• Connects via USB type C male or A male connector.
• Support for connection of phones with microUSB connector via OTG adapter.
• USB-bus card reader power supply.
• Dimensions 75 x 22 x 12 mm with caps attached.
• Weight 18 g.
Supported Operating Systems:
• MS Windows XP / Vista / 7/8 / 8.1 / 10 and later, Windows Server 2003/2008/2012/2016 and later (all 32- and 64-bit Windows versions supported), Mac OS X 10.x and higher Linux with 2.4.x kernel and higher, Android all versions.
• Note: Drivers are included with supported operating systems and will be installed automatically.
Package contains:
• SuperSpeed USB card reader,
• 2 USB connector caps,
• key hinge,
• printed installation guide,
• packed in a cardboard box.
With two USB-C and USB-A connectors, the reader can be directly connected to desktop computers or laptops, as well as cell phones and tablets with a USB-C connector.
With USB 3.2 Gen 1 (USB 3.0) interface, the reader achieves significantly higher data rates for UHS-I SD cards compared to USB 2.0 interface readers.
The card reader enables simultaneous handling of cards in both slots and direct copying between them.
The metal body of the reader not only looks great, but also increases its durability. Both connectors are protected by carrying caps when carrying them. The included hinge allows the card reader to be attached to a key ring.
The installation can be done even by an amateur - you insert the reader into the USB port of your computer or mobile device and the rest is completely automatic.
Card reader - two slots, supports the following formats:
• Micro SD slot: microSD / microSDHC / microSDXC / TransFlash,
• SD slot: Secure Digital, SDHC, SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with miniSD, microSD, microSDHC, microSDXC, MMC Micro adapter.
The reader supports the following flash card specifications:
• SD 1.0 / 1.1 (SD - Secure Digital, up to 2GB).
• SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB).
• SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB).
• MMC and eMMC 3.x/4.0/4.1/4.2/4.3/4.4/4.5/5.0 (8-bit).
• Support for SD 3.01 and SD Jukebox applications (CPRM functions).
• Ultra High Speed UHS-I support (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s.
• Supports ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function.
• 2 LUN - in file managers, the reader is indicated as two disk drives.
• FAT 12/16/32, NTFS, exFAT (FAT 64) file formats support.
Other features:
• SuperSpeed USB - USB 3.2 Gen 1 interface (before USB 3.1 Gen 1 / USB 3.0).
• Also compatible with USB 3.2 Gen 2, backward compatible with USB 2.0 and USB 1.1.
• Supports transmission rates 1.5 / 12 / 480 / 5000 Mbit/s (low / full / high / super speed).
• Full Plug and Play and Hot Swap support.
• Connects via USB type C male or A male connector.
• Support for connection of phones with microUSB connector via OTG adapter.
• USB-bus card reader power supply.
• Dimensions 75 x 22 x 12 mm with caps attached.
• Weight 18 g.
Supported Operating Systems:
• MS Windows XP / Vista / 7/8 / 8.1 / 10 and later, Windows Server 2003/2008/2012/2016 and later (all 32- and 64-bit Windows versions supported), Mac OS X 10.x and higher Linux with 2.4.x kernel and higher, Android all versions.
• Note: Drivers are included with supported operating systems and will be installed automatically.
Package contains:
• SuperSpeed USB card reader,
• 2 USB connector caps,
• key hinge,
• printed installation guide,
• packed in a cardboard box.
Producent
Productnummer
3417421
Model
CRE-SAC
EAN
8595247904416
Naar de website van de producent
Compatibele geheugenkaarten
MMC, MMC Mobile, MMCmicro, MicroSD (TransFlash), MicroSDHC, MicroSDXC, MiniSD, RS-MMC, SD, SDHC, SDXC
Intern
Nee
Kleur van het product
Grijs
Aantal geheugenkaart sleuven
2
Overdrachtssnelheid
5000 Mbit/s
Materiaal behuizing
Metaal
Hot-swap
Ja
Plug and play
Ja
LED-indicatoren
Ja
Compatibele producten
PC, laptops, tablets, mobile phones
Certificering
CE, RoHS
Interface
USB 3.0 Type-A/Type-C
Aantal USB 3.2 Gen 1 (3.1 Gen 1)-poorten
2
Bluetooth
Nee
SIM card support
Nee
Breedte
12 mm
Diepte
75 mm
Hoogte
22 mm
Gewicht
18 g
Aantal per verpakking
336 stuk(s)
Breedte verpakking
15 mm
Diepte verpakking
100 mm
Hoogte verpakking
70 mm
Gewicht verpakking
34 g
Type verpakking
Doos
Gebruikershandleiding
Ja
Ondersteunt Windows
Ja
Ondersteunt Mac-besturingssysteem
Ja
Ondersteunt Linux
Ja
Ondersteunde server operating systems
Ja
Ondersteunde mobiele besturingssystemen
Ja
Compatibele besturingssystemen
MS Windows XP / Vista / 7/8 / 8.1 / 10 and later, Windows Server 2003/2008/2012/2016 and later (all 32- and 64-bit Windows versions supported), Mac OS X 10.x and higher Linux with 2.4.x kernel and higher, Android all versions
Garantieperiode
3 jaar
Certificaten van naleving
RoHS, CE
Prestatie
Compatibele geheugenkaarten
MMC, MMC Mobile, MMCmicro, MicroSD (TransFlash), MicroSDHC, MicroSDXC, MiniSD, RS-MMC, SD, SDHC, SDXC
Intern
Nee
Kleur van het product
Grijs
Aantal geheugenkaart sleuven
2
Overdrachtssnelheid
5000 Mbit/s
Materiaal behuizing
Metaal
Hot-swap
Ja
Plug and play
Ja
LED-indicatoren
Ja
Compatibele producten
PC, laptops, tablets, mobile phones
Certificering
CE, RoHS
Poorten & interfaces
Interface
USB 3.0 Type-A/Type-C
Aantal USB 3.2 Gen 1 (3.1 Gen 1)-poorten
2
Bluetooth
Nee
SIM card support
Nee
Gewicht en omvang
Breedte
12 mm
Diepte
75 mm
Hoogte
22 mm
Gewicht
18 g
Verpakking
Aantal per verpakking
336 stuk(s)
Breedte verpakking
15 mm
Diepte verpakking
100 mm
Hoogte verpakking
70 mm
Gewicht verpakking
34 g
Type verpakking
Doos
Inhoud van de verpakking
Gebruikershandleiding
Ja
Minimale systeemeisen
Ondersteunt Windows
Ja
Ondersteunt Mac-besturingssysteem
Ja
Ondersteunt Linux
Ja
Ondersteunde server operating systems
Ja
Ondersteunde mobiele besturingssystemen
Ja
Compatibele besturingssystemen
MS Windows XP / Vista / 7/8 / 8.1 / 10 and later, Windows Server 2003/2008/2012/2016 and later (all 32- and 64-bit Windows versions supported), Mac OS X 10.x and higher Linux with 2.4.x kernel and higher, Android all versions
Overige specificaties
Garantieperiode
3 jaar
Certificaten van naleving
RoHS, CE
Bovenstaande specificaties en vermeldingen kunnen zonder voorafgaande kennisgeving door de fabrikant worden gewijzigd. Sommige teksten kunnen automatisch of machinaal zijn gegenereerd en daardoor misleidende teksten opleveren.