Spectrum Filament / PET-G Matt / Bloody Red (RAL 3020) / ⌀ 1.75 mm / 1 kg
PETG mat - rood - Filament voor 3D-printers
PETG (Polyethyleentereftalaat Glycol) is een filamentmateriaal dat de sterkte en duurzaamheid van ABS combineert met de eenvoudige printbaarheid van PLA. Het staat bekend om zijn hoge slagvastheid, goede flexibiliteit en weerstand tegen chemicaliën en vocht, wat het ideaal maakt voor functionele onderdelen en buitengebruik. PETG heeft een hogere smelttemperatuur dan PLA en vereist vaak een verwarmd printbed om kromtrekken te voorkomen. Het materiaal is bovendien relatief eenvoudig te printen en levert gladde en stevige printoppervlakken.
- Gewicht: 1 kg.
- Lengte: 307,96 m.
- Diameter: 1,75 ± 0,05 mm.
Smelttemperatuur: 230 - 255 °C.
Printbedtemperatuur: 60 - 80 °C.
Printsnelheid: 30-70 mm.
Dichtheid (bij 21,5 °C): 1,35 g/cm³.
Slagvastheid: 3,5 KJ/m².
Treksterkte: 30 %.
Temperatuurbestendigheid: 80 °C. voor vervorming
Vloeigrens bij 50 mm/min: 45 MPa (3D-printen)
- Spoel: 200mm Buitenste diameter & 52mm Binnenste diameter & 67mm Hoogte, In plastic
Spectrum PET-G MATT Filament
Matte print surface
Spectrum PET-G MATT is a PETG-based material whose chemical composition has been modified to achieve matte surface finishes on printed parts. The matte appearance of the manufactured components significantly enhances their aesthetics and additionally minimises the visibility of layer lines on the side surfaces of printed elements.
The use of dedicated additives has resulted in improved temperature resistance, impact strength and reduced brittleness of the finished parts. The modification of Spectrum PET-G MATT also includes UV stabilisation.
Key properties:
- VICAT – 85 °C
- UV stabiliser
- High-quality matte side surface with barely visible layers
- Improved adhesion between layers and between the build platform and printed parts
- High mechanical strength of printed elements
- No shrinkage after cooling
Areas of application:
- Interior design and decoration
- Architectural models
- Educational projects
- Initial industrial design prototypes for concept visualisation
The above-mentioned properties make Spectrum PET-G MATT particularly suitable for applications focused on the presentation of strong aesthetic qualities, such as initial industrial design prints for concept visualisation and the presentation of design variants of specific constructions. Additionally, it is well suited for interior furnishing applications and the production of architectural models.
VERIFY YOUR SPOOL – the most precise quality control system on the market
Filament for 3D printers is produced using free extrusion. This is one of the most demanding extrusion processing techniques due to the particularly strong influence of process parameters on product dimensions and material homogeneity.
During the production of Spectrum Filaments, every 1 mm of material is continuously measured on two axes with an accuracy of ±0.8 µm, resulting in a high-quality final product. As proof of this, Spectrum Filaments is one of the few manufacturers worldwide to introduce the possibility of presenting individual parameters for each produced spool online:
- Diameter chart along the entire length of the filament,
- Average diameter of the entire spool,
- Ovality,
- Standard deviation.
Precise verification guarantees that Spectrum Filaments products meet the rigorous requirements of the market.
Bovenstaande specificaties en vermeldingen kunnen zonder voorafgaande kennisgeving door de fabrikant worden gewijzigd. Sommige teksten kunnen automatisch of machinaal zijn gegenereerd en daardoor misleidende teksten opleveren.