Productnummer: 2595711

Noctua NF-A4x20 PWM - Case ventilator - 40mm - Brown - 15 dBA

Kastkoeler, afmeting: 40mm x 40mm x 20mm (HxBxD), geluidsniveau: 12,2 - 14,9 dBA, luchtstroom: 8,3 - 9,4 CFM, ventilator RPM: ​​1200-5000 ±10%, PWM-gestuurd met een vier-pins moederbordaansluiting en bruin van kleur.

Lees meer
Op voorraad
16,49 € 13,63 € excl. BTW
Goedkoopste privé verzending 4,99 €
15+ stks Op voorraad - 2-3 werkdagen levertijd

Featuring advanced aerodynamic design measures such as Flow Acceleration Channels and Noctua’s AAO frame, the NF-A4x20 is a highly optimised, premium-quality quiet fan in size 40x20mm. The PWM version sports Noctua’s custom-designed NE-FD1 IC for fully automatic speed control via 4-pin fan headers and comes with a Low-Noise Adaptor as well as an OmniJoin™ Adaptor Set for easy connection to proprietary fan headers. Its superb running smoothness, reference-class SSO2 bearing and Noctua’s trusted premium quality make it an elite choice for the highest demands.

40x20mm size

40x20mm size

Compared to Noctua’s award-winning NF-A4x10, the NF-A4x20 is twice as thick, which allows for increased static pressure performance and makes the NF-A4x20 ideal for demanding applications with high flow resistance.
Flow Acceleration Channels

Flow Acceleration Channels

The NF-A4x20 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.
AAO frame

AAO frame

Noctua's AAO (Advanced Acoustic Optimisation) frames feature integrated anti-vibration pads as well as Noctua's proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan's performance/noise efficiency.
Stepped Inlet Design

Stepped Inlet Design

Noctua's Stepped Inlet Design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.
Inner Surface Microstructures

Inner Surface Microstructures

With the tips of the fan blades ploughing through the boundary layer created by the Inner Surface Microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.
Integrated Anti-Vibration Pads

Integrated Anti-Vibration Pads

Integrated Anti-Vibration Pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard mounting systems and fan clips used on heatsinks.
SSO2 bearing

SSO2 bearing

The NF-A4x20 features the further optimised second generation of Noctua's renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.
Custom-designed PWM IC with SCD

Custom-designed PWM IC with SCD

Supporting fully automatic PWM speed control, the fan uses Noctua's custom-designed NE-FD1 PWM IC that integrates Smooth Commutation Drive (SCD) technology. By providing smoother torque impulses, SCD suppresses PWM switching noises and thus makes the fan quieter at low speeds.
Stops at 0% PWM

Stops at 0% PWM

When the fan is set to 0% PWM duty cycle by the motherboard or PWM fan controller, it will stop. This makes it ideal for creating setups with semi-passive cooling that automatically turn the fans off and thus run completely silent at idle if thermals allow.
Low-Noise Adaptor

Low-Noise Adaptor

The NF-A4x20 PWM is supplied with a (L.N.A.) that reduces the maximum fan speed from 5000 to 4400rpm. The L.N.A. can be used either to run the fan at a fixed speed of 4400rpm or to cap the maximum speed when using automatic PWM control.
OmniJoin™ adaptor set

OmniJoin™ adaptor set

Many devices featuring 40mm fans use proprietary fan headers, so the NF-A4x20 comes with Noctua's OmniJoin™ adaptor set. Just cut the original fan's cable, fix it to the adaptor using the supplied 3M Scotchlok™ connectors and you can plug the NF-A4x20 to proprietary fan headers!
Extensive cabling options

Extensive cabling options

The fan's short 20cm primary cable minimises cable clutter in typical applications while the supplied 30cm extension provides extended reach when necessary. Both cables are fully sleeved and a 4-pin y-cable allows the connection of a second fan to the same PWM fan header for automatic control.
6-year manufacturer’s warranty

6-year manufacturer’s warranty

Noctua fans are renowned for their impeccable quality and outstanding longevity. Like all Noctua fans, the NF-A4x20 features an MTTF of more than 150.000 hours rating and comes with a full 6-year manufacturer’s warranty.

Producent
Productnummer
2595711
Model
NF-A4x20 PWM
EAN
9010018100105
Naar de website van de producent
Productbeschrijving
Noctua NF-A4x20 PWM - ventilatorhuis
Producttype
Ventilatorhuis
Inhoud pakket
Schroeven, Low-Noise Adapter (L.N.A.), OmniJoin Adaptor Set, verlengkabel (30 cm), 4-pins PWM Y-kabel, NA-AV3 anti-trillingsmontage
Diameter van koelventilator
40 mm
Hoogte ventilator
20 mm
Lager ventilator
SSO2 lager
Rotatiesnelheid
5000 rpm
Luchtstroom
9,4 cfm
Geluidsniveau
14.9 dBA
Stroomconnector
4-pin ventilatoraansluiting
Nominale spanning
12 V
Functies
PWM-ondersteuning (Pulse Width Modulation), Advanced Acoustic Optimisation (AAO), luchtstroomversnellingskanalen, Smooth Commutation Drive (SCD)-technologie, geïntegreerde anti-trillingskussens, Stepped Inlet Design, Inner Surface Microstructures
Afmetingen (BxDxH)
4 cm x 4 cm x 2 cm

Algemeen

Producttype
Ventilatorhuis
Inhoud pakket
Schroeven, Low-Noise Adapter (L.N.A.), OmniJoin Adaptor Set, verlengkabel (30 cm), 4-pins PWM Y-kabel, NA-AV3 anti-trillingsmontage
Breedte
4 cm
Diepte
4 cm
Hoogte
2 cm

Warmteopnemer & koeler

Diameter van koelventilator
40 mm
Hoogte ventilator
20 mm
Lager ventilator
SSO2 lager
Rotatiesnelheid
5000 rpm
Luchtstroom
9,4 cfm
Geluidsniveau
14.9 dBA
Stroomconnector
4-pin ventilatoraansluiting
Nominale spanning
12 V
Nominale stroom
0.05 A
Energieverbruik
0.6 W
Functies
PWM-ondersteuning (Pulse Width Modulation), Advanced Acoustic Optimisation (AAO), luchtstroomversnellingskanalen, Smooth Commutation Drive (SCD)-technologie, geïntegreerde anti-trillingskussens, Stepped Inlet Design, Inner Surface Microstructures

Diversen

Montagekit
Inclusief
MTBF (gemiddelde tijd tussen twee storingen)
150,000 uur/uren

Garantie van de fabrikant

Service & Support
Beperkte garantie: - 6 jaar

Bovenstaande specificaties en vermeldingen kunnen zonder voorafgaande kennisgeving door de fabrikant worden gewijzigd. Sommige teksten kunnen automatisch of machinaal zijn gegenereerd en daardoor misleidende teksten opleveren.